ALTIN PWR220VDC LOG5V POS DIN

zen451019·EMASA_drivers·Schematics/ALTIN_PWR220VDC_LOG5V_POS_DIN/ALTIN_PWR220VDC_LOG5V_POS_DIN/ALTIN_PWR220VDC_LOG5V_POS_DIN.kicad_pcb

ALTIN PWR220VDC LOG5V POS DIN PCB layout, top view — open source AVR/Arduino board by zen451019

About the ALTIN PWR220VDC LOG5V POS DIN PCB

ALTIN PWR220VDC LOG5V POS DIN is an open source AVR/Arduino PCB design by zen451019, published on GitHub. It is a 2-layer board measuring 92 × 78 mm, with 42 components from 8 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the PC817. By type, the board carries 24 resistors, 12 ICs, 1 module and 1 connector.

From the project

Compendium of codes, schematics, and controller boards designed for use by EMASA

Main components on the ALTIN PWR220VDC LOG5V POS DIN

ALTIN PWR220VDC LOG5V POS DIN bill of materials (BOM)

42 components, 8 distinct parts.

QtyPartRefs
12
PC817
U1, U2, U3, U4, U5, U6, U7, U8 +4
1
Arduino_Nano_v3.x
A2
1
Screw_Terminal_01x02
J1
1
Conn_01x06
MOTOR_OUT1
2
Screw_Terminal_01x06
MUL_IN1, PRES_IN1
1
HLK-PM01
PS1
12
390
R1, R3, R5, R8, R9, R10, R14, R15 +4
12
10k
R2, R4, R6, R7, R11, R12, R13, R18 +4

ALTIN PWR220VDC LOG5V POS DIN design files

The KiCad project lives in the zen451019/EMASA_drivers repository on GitHub; these links point at the commit this page was built from.

ALTIN PWR220VDC LOG5V POS DIN: common questions

What microcontroller does the ALTIN PWR220VDC LOG5V POS DIN use?

The ALTIN PWR220VDC LOG5V POS DIN is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the ALTIN PWR220VDC LOG5V POS DIN PCB?

The ALTIN PWR220VDC LOG5V POS DIN measures 92 × 78 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ALTIN PWR220VDC LOG5V POS DIN?

42 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the ALTIN PWR220VDC LOG5V POS DIN design files?

From the zen451019/EMASA_drivers repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ALTIN PWR220VDC LOG5V POS DIN design in my own project?

The repository has no license, so all rights stay with zen451019. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ALTIN PWR220VDC LOG5V POS DIN without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in EMASA_drivers

Similar boards