ALTIO PWR12VDC LOG12V NEG INT

zen451019·EMASA_drivers·Schematics/ALTIO_PWR12VDC_LOG12V_NEG_INT/ALTIO_PWR12VDC_LOG12V_NEG_INT.kicad_pcb

ALTIO PWR12VDC LOG12V NEG INT PCB layout, top view — open source AVR/Arduino board by zen451019

About the ALTIO PWR12VDC LOG12V NEG INT PCB

ALTIO PWR12VDC LOG12V NEG INT is an open source AVR/Arduino PCB design by zen451019, published on GitHub. It is a 2-layer board measuring 90 × 70 mm, with 26 components from 10 distinct parts.

Its main chip is the Arduino_Nano_v3.x, from the AVR/Arduino family. Other key parts include the PC817 and YAAJ_DCDC_StepDown_LM2596. By type, the board carries 12 resistors, 7 ICs, 6 connectors and 1 module.

From the project

Compendium of codes, schematics, and controller boards designed for use by EMASA

Main components on the ALTIO PWR12VDC LOG12V NEG INT

ALTIO PWR12VDC LOG12V NEG INT bill of materials (BOM)

26 components, 10 distinct parts.

QtyPartRefs
6
PC817
U1, U2, U3, U7, U9, U10
1
YAAJ_DCDC_StepDown_LM2596
U4
1
Arduino_Nano_v3.x
A2
2
Screw_Terminal_01x02
J1, J5
2
Screw_Terminal_01x04
J2, J3
1
Barrel_Jack_Switch
J4
1
Conn_01x02_Pin
J6
4
1.2K
R8, R9, R10, R11
6
10k
R12, R13, R15, R18, R19, R20
2
390
R14, R16

ALTIO PWR12VDC LOG12V NEG INT design files

The KiCad project lives in the zen451019/EMASA_drivers repository on GitHub; these links point at the commit this page was built from.

ALTIO PWR12VDC LOG12V NEG INT: common questions

What microcontroller does the ALTIO PWR12VDC LOG12V NEG INT use?

The ALTIO PWR12VDC LOG12V NEG INT is built around the Arduino_Nano_v3.x, from the AVR/Arduino family.

How big is the ALTIO PWR12VDC LOG12V NEG INT PCB?

The ALTIO PWR12VDC LOG12V NEG INT measures 90 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ALTIO PWR12VDC LOG12V NEG INT?

26 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the ALTIO PWR12VDC LOG12V NEG INT design files?

From the zen451019/EMASA_drivers repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ALTIO PWR12VDC LOG12V NEG INT design in my own project?

The repository has no license, so all rights stay with zen451019. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ALTIO PWR12VDC LOG12V NEG INT without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in EMASA_drivers

Similar boards