Kinematic outfits
ZephyrCloudNine·kinematic_outfits·hardware/stm32_servo_controller/stm32_servo_controller.kicad_pcb
About the Kinematic outfits PCB
Kinematic outfits is an open source STM32 PCB design by ZephyrCloudNine, published on GitHub. It is a 4-layer board measuring 74.9 × 57.2 mm, with 82 components from 47 distinct parts.
Its main chip is the STM32F103C8TX, from the STM32 family. Other key parts include the USBLC6-2SC6, MT3608B, LP5907MFX-3.3/NOPB, IP2312 and DW01. By type, the board carries 29 resistors, 22 capacitors, 12 connectors, 8 ICs, 5 diodes and 3 inductors.
It belongs with the robotics & motion designs in this gallery.
From the project
Project files for custom "kinematic" dress that uses servos to move parts of it in a wavy motion.
Main components on the Kinematic outfits
Kinematic outfits bill of materials (BOM)
82 components, 47 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103C8TX STM32F103C8Tx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U2 |
| 1 | MT3608B | SOT-23-6 | U3 |
| 1 | LP5907MFX-3.3/NOPB | SOT-23-5 | U4 |
| 1 | IP2312 | HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.3x2.3mm | U5 |
| 1 | DW01 | SOT-23-6 | U6 |
| 1 | C7499846 AO8810 | TSSOP-8_4.4x3mm_P0.65mm | U7 |
| 1 | TXS0108EPW | TSSOP-20_4.4x6.5mm_P0.65mm | U8 |
| 1 | AO3415A | SOT-23 | Q1 |
| 1 | 8MHZ 8MHz | Crystal_HC49-4H_Vertical | Y1 |
| 1 | DEBUG | PinHeader_1x10_P2.54mm_Vertical | J1 |
| 1 | BTN | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | USB4105GFA120 | GCT_USB4105GFA120 | J3 |
| 1 | BAT IN | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | SERVO1 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J5 |
| 1 | SERVO4 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J6 |
| 1 | SERVO7 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J7 |
| 1 | SERVO2 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J8 |
| 1 | SERVO5 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J9 |
| 1 | SERVO8 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J10 |
Show 27 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SERVO3 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J11 |
| 1 | SERVO6 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J12 |
| 1 | C516068 Polyfuse | Fuse_1206_3216Metric | F1 |
| 2 | C2286 LED_ORANGE | LED_0603_1608Metric | D1, D4 |
| 2 | C2290 LED_GREEN | LED_0603_1608Metric | D2, D5 |
| 1 | SS54 | D_SMB | D3 |
| 1 | C79382 FerriteBead | L_0805_2012Metric | FB1 |
| 1 | 6.8UH 6.8uH | L_Sunlord_MWSA0503S | L1 |
| 1 | 2.2UH 2.2uH | L_Sunlord_MWSA0503S | L2 |
| 10 | 100NF 100nF | C_0603_1608Metric | C1, C5, C6, C7, C9, C10, C11, C18 +2 |
| 4 | 1UF 1uF | C_0603_1608Metric | C2, C8, C14, C15 |
| 2 | 20PF 20pF | C_0603_1608Metric | C3, C4 |
| 2 | 22UF 22uF | C_1206_3216Metric | C12, C13 |
| 1 | 10UF 10uF | C_0805_2012Metric | C16 |
| 3 | 22UF 22uF | C_0805_2012Metric | C17, C19, C20 |
| 8 | 10K | R_0603_1608Metric | R1, R2, R3, R4, R8, R9, R20, R28 |
| 4 | 5.1K | R_0603_1608Metric | R5, R10, R14, R15 |
| 2 | 22R | R_0603_1608Metric | R6, R7 |
| 1 | 1.5K | R_0603_1608Metric | R11 |
| 5 | 100R | R_0603_1608Metric | R12, R13, R19, R21, R23 |
| 2 | DNP | R_0603_1608Metric | R16, R29 |
| 1 | 110K | R_0603_1608Metric | R17 |
| 1 | 15K | R_0603_1608Metric | R18 |
| 1 | 51K | R_0603_1608Metric | R22 |
| 1 | DNP | R_0805_2012Metric | R24 |
| 2 | 1K | R_0603_1608Metric | R25, R26 |
| 1 | 0.5R | R_0805_2012Metric | R27 |
Kinematic outfits design files
The KiCad project lives in the ZephyrCloudNine/kinematic_outfits repository on GitHub; these links point at the commit this page was built from.
Kinematic outfits: common questions
What microcontroller does the Kinematic outfits use?
The Kinematic outfits is built around the STM32F103C8TX, from the STM32 family.
How big is the Kinematic outfits PCB?
The Kinematic outfits measures 74.9 × 57.2 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Kinematic outfits?
82 components, from 47 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Kinematic outfits design files?
From the ZephyrCloudNine/kinematic_outfits repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Kinematic outfits design in my own project?
The repository has no license, so all rights stay with ZephyrCloudNine. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Kinematic outfits without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k