Dual-FOC-Controller

Zhang-JK·Dual-FOC-Controller·hardware/foc-driver/foc-driver.kicad_pcb

Dual-FOC-Controller PCB layout, top view — open source STM32 board by Zhang-JK

About the Dual-FOC-Controller PCB

Dual-FOC-Controller is an open source STM32 PCB design by Zhang-JK, published on GitHub. It is a 4-layer board measuring 46 × 46 mm, with 61 components from 31 distinct parts.

Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the INA240A2PW, DRV8313PWPR and SN65HVD232. By type, the board carries 23 capacitors, 13 resistors, 10 connectors, 8 ICs, 4 diodes and 2 switches.

Main components on the Dual-FOC-Controller

Dual-FOC-Controller bill of materials (BOM)

61 components, 31 distinct parts — part numbers from the project's BOM.

QtyPartRefs
4
INA240A2PW
U1, U2, U3, U4
1
STM32F103C8T6
U5
2
DRV8313PWPR
U6, U7
1
SN65HVD232
U8
1
8MHz 20pF
Y1
1
OUT1
J1
1
OUT2
J2
1
ENCODER1
Encoder1
J3
1
ENCODER2
Encoder2
J4
1
PWR-OUT
J5
1
PWR-IN
J6
1
CAN
J7
1
UART
J9
1
I2C
J10
1
SWD
J11
1
SW_DIP_X04
SW_DIP_x04
SW1
1
Switch-Stand
SW2
2
LED-R
D2, D3
1
LED-B
D4
1
LED-G
D5
Show 11 more
QtyPartRefs
15
0.1UF
0.1uf
C1, C2, C3, C4, C7, C8, C9, C10 +7
2
0.01UF
0.01uF
C5, C6
1
10UF
10uF
C11
2
0.47UF
0.47uF
C14, C15
2
36PF
36pF
C16, C17
1
100UF
100uF
C22
4
0.01R
R1, R2, R3, R4
1
120R
R8
4
10KR
10kR
R9, R10, R11, R16
2
10kΩ
R12, R14
2
2kΩ
R13, R15

Dual-FOC-Controller design files

The KiCad project lives in the Zhang-JK/Dual-FOC-Controller repository on GitHub; these links point at the commit this page was built from.

Dual-FOC-Controller: common questions

What microcontroller does the Dual-FOC-Controller use?

The Dual-FOC-Controller is built around the STM32F103C8T6, from the STM32 family.

How big is the Dual-FOC-Controller PCB?

The Dual-FOC-Controller measures 46 × 46 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Dual-FOC-Controller?

61 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Dual-FOC-Controller design files?

From the Zhang-JK/Dual-FOC-Controller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Dual-FOC-Controller design in my own project?

The repository has no license, so all rights stay with Zhang-JK. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Dual-FOC-Controller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards