9 open source boards using the DRV8313PWPR
Real designs built with the DRV8313PWPR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
GimbalFOC
avaninder
47 × 47 mm28 parts4LNo license5STM32
SmartKnobController
Larson-Nick
110 × 110 mm82 parts2LNo license1STM32
Dual-FOC-Controller
Zhang-JK
46 × 46 mm61 parts4LNo license0Drv8313-board
kaydensigh
50 × 50 mm21 parts4LMIT0ProPrj BLDCcontroller 2025-09-27
BrookDawn
40 × 40 mm53 parts4LNo license0STM32
Mallet
ayuusweetfish
19.5 × 27 mm24 parts2LCERN-OHL-S-2.01ESP32
Base controller
Jayweiii
120 × 90 mm43 parts2LNo license0AVR/Arduino
Bldc controller
rjwalters
70 × 90 mm42 parts4LMIT74AVR/Arduino
Bldc controller routed
rjwalters
70 × 90 mm42 parts4LMIT74
How designs wire the DRV8313PWPR
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the DRV8313PWPR connects to, and the resistors, capacitors and other passives placed on it.
- The CP1 pin has a series capacitor on 8 of 8 designs, most often 10 nF (then 100 nF).
- The CP2 pin has a series capacitor on 8 of 8 designs, most often 10 nF (then 100 nF).
- The V3P3OUT pin has a capacitor to GND on 7 of 8 designs, most often 470 nF (then 100 nF).
- The VCP pin has a capacitor to the supply on 6 of 8 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CP1pin 1 | Connected to: Signal 100% |
|
| CP2pin 2 | Connected to: Signal 100% |
|
| VCPpin 3 | Connected to: Signal 100% |
|
| VMpin 4, 11 | Connected to: VCC 75% · a signal 25% |
|
| PGND1pin 6 | Connected to: GND 100% | — |
| PGND2pin 7 | Connected to: GND 100% | — |
| PGND3pin 10 | Connected to: GND 100% | — |
| COMPPpin 12 | Connected to: GND 75% | — |
| COMPNpin 13 | Connected to: GND 63% | — |
| GNDpin 14, 20, 28 | Connected to: GND 100% | — |
| V3P3OUTpin 15 | Connected to: Signal 75% · 3.3V 25% |
|
| FAULTpin 18 | Connected to: The microcontroller 50% |
|
| NCpin 21 | Connected to: Not connected 75% · GND 25% | — |
| EPpin 29 | Connected to: GND 88% | — |
12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Bldc controller by rjwalters, GimbalFOC by avaninder, Mallet by ayuusweetfish and SmartKnobController by Larson-Nick.
The DRV8313PWPR in open source designs
The gallery holds 9 open source boards using the DRV8313PWPR from 8 GitHub repositories; a typical one measures about 50 × 50 mm and carries around 42 components.
67% use four copper layers or more, and 44% carry an open source license.
The most starred is Bldc controller routed by rjwalters.
Microcontrollers on boards using the DRV8313PWPR
What boards using the DRV8313PWPR are built for
DRV8313PWPR: common questions
Where can I find a DRV8313PWPR reference design?
Each of the 9 boards on this page is a real design using the DRV8313PWPR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the DRV8313PWPR CP1 pin connected?
The CP1 pin has a series capacitor on 8 of 8 designs, most often 10 nF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the DRV8313PWPR.
How is the DRV8313PWPR CP2 pin connected?
The CP2 pin has a series capacitor on 8 of 8 designs, most often 10 nF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the DRV8313PWPR.
How is the DRV8313PWPR V3P3OUT pin connected?
The V3P3OUT pin has a capacitor to GND on 7 of 8 designs, most often 470 nF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the DRV8313PWPR.
Which microcontrollers do boards using the DRV8313PWPR use?
Most are built on STM32 (3), AVR/Arduino (2) and ESP32 (2).
How big is a typical board using the DRV8313PWPR?
The median is 50 × 50 mm, and 33% are two-layer designs.
What is the most popular open source board using the DRV8313PWPR?
By GitHub stars, Bldc controller routed by rjwalters, with 74 stars.
Can I simulate one of these boards using the DRV8313PWPR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.