Sesame lock integration
zhixuan2333·sesame-lock-integration·sesame-lock-auto-lock-unlock/sesame-lock-auto-lock-unlock.kicad_pcb
About the Sesame lock integration PCB
Sesame lock integration is an open source ESP32 PCB design by zhixuan2333, published on GitHub under the MIT license. It is a 2-layer board measuring 70 × 35 mm, with 7 components from 6 distinct parts.
Its main chip is the XIAO-ESP32-C6-DIP, from the ESP32 family. Other key parts include the DS1302+. By type, the board carries 2 ICs, 2 connectors, 1 crystal, 1 battery holder and 1 capacitor.
It belongs with the iot & wireless designs in this gallery.
From the project
自動施錠・解錠スケジューラー — Seeed XIAO ESP32C6 + DS1302 RTC + SESAME スマートロック
自動施錠・解錠スケジューラー — Seeed XIAO ESP32C6 + DS1302 RTC + SESAME スマートロック
設定した時刻に SESAME スマートロックを自動で施錠・解錠します。DS1302 RTC で正確な時刻を保持し、ESP32C6 のディープスリープを活用して低消費電力を実現します。起動時にシリアルシェルが立ち上がり、時刻やスケジュールをその場で設定できます。
- VS Code - PlatformIO IDE 拡張機能 - USB-C ケーブル (XIAO との接続用)
1. VS Code に PlatformIO IDE 拡張機能をインストール 2. このリポジトリをクローン
3. VS Code でフォルダを開く → PlatformIO が自動でライブラリを取得 4. Sesame キー情報を設定
Main components on the Sesame lock integration
Sesame lock integration bill of materials (BOM)
7 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C6-DIP | XIAO-ESP32-C6-DIP | U1 |
| 1 | DS1302+ | DIP-8_W7.62mm | U2 |
| 1 | Crystal | Crystal_C38-LF_D3.0mm_L8.0mm_Horizontal | Y1 |
| 2 | Conn_01x07_Pin | PinHeader_1x07_P2.54mm_Vertical | J1, J2 |
| 1 | Battery | BatteryHolder_MYOUNG_BS-07-A1BJ001_CR2032 | BT1 |
| 1 | 0.1u | C_Disc_D7.5mm_W2.5mm_P5.00mm | C1 |
Sesame lock integration design files
The KiCad project lives in the zhixuan2333/sesame-lock-integration repository on GitHub; these links point at the commit this page was built from.
Sesame lock integration: common questions
What microcontroller does the Sesame lock integration use?
The Sesame lock integration is built around the XIAO-ESP32-C6-DIP, from the ESP32 family.
How big is the Sesame lock integration PCB?
The Sesame lock integration measures 70 × 35 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sesame lock integration?
7 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sesame lock integration design files?
From the zhixuan2333/sesame-lock-integration repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Sesame lock integration design in my own project?
Yes, under the terms of its MIT license, which zhixuan2333 chose for the repository.
Can I test firmware for the Sesame lock integration without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k