Terraskipper-V2
ZIZO932·Terraskipper-V2·Schematic & PCB/Terraskipper.kicad_pcb
About the Terraskipper-V2 PCB
Terraskipper-V2 is an open source Raspberry Pi PCB design by ZIZO932, published on GitHub. It is a 2-layer board measuring 51 × 85 mm, with 20 components from 17 distinct parts.
Its main chip is the RaspberryPi_Pico_2_W, from the Raspberry Pi family. Other key parts include the BTS7960, DS18B20 and MPU_6050. By type, the board carries 9 connectors, 4 ICs, 4 modules, 2 capacitors and 1 resistor.
It belongs with the robotics & motion and sensors designs in this gallery.
From the project
Terraskipper is a project about building a mudskipper-inspired soft robot that can help in agriculture. The robot is designed to move on difficult surfaces like mud and uneven land while using sensors and soft robotics technology to support smart farming and environmental monitoring.
A mudskipper-inspired robot I've been building to explore soil monitoring on difficult ground. This version moves the pectoral fins with DC geared motors, uses servos for the tail and sensor placement, and runs on a Raspberry Pi Pico 2 W.
The project started with soil problems in Egypt's Nile Delta. I wanted to explore a robot that could carry sensors over muddy ground, and the way a mudskipper moves between land and water gave me an idea for the mechanism.

Main components on the Terraskipper-V2
Terraskipper-V2 bill of materials (BOM)
20 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | BTS7960 | PinHeader_1x06_P2.54mm_Vertical | U1, U2 |
| 1 | DS18B20 | TO-92_Inline | U3 |
| 1 | MPU_6050 | PinHeader_1x07_P2.54mm_Vertical_SMD_Pin1Left | U4 |
| 1 | RaspberryPi_Pico_2_W | RaspberryPi_Pico_Common_Unspecified | A1 |
| 1 | SERVO_3 | PinHeader_1x03_P2.54mm_Vertical | M1 |
| 1 | SERVO_2 | PinHeader_1x03_P2.54mm_Vertical | M2 |
| 1 | SERVO_1 | PinHeader_1x03_P2.54mm_Vertical | M3 |
| 1 | BATTERY_12V | PhoenixContact_MSTBVA_2,5_2-G-5,08_1x02_P5.08mm_Vertical | J1 |
| 1 | 6V BUCK CONVERTER | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | 5V BUCK CONVERTER | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | GPS NEO 7M | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | TDS Sensor | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Soil Moisture | PinHeader_1x03_P2.54mm_Vertical | J6 |
| 3 | HC-SR04 | PinHeader_1x04_P2.54mm_Vertical | J7, J8, J9 |
| 1 | 1000µF capacitor | CP_Axial_L10.0mm_D4.5mm_P15.00mm_Horizontal | C1 |
| 1 | 470µF capacitor | CP_Axial_L10.0mm_D4.5mm_P15.00mm_Horizontal | C2 |
| 1 | 4.7kΩ | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1 |
Terraskipper-V2 design files
The KiCad project lives in the ZIZO932/Terraskipper-V2 repository on GitHub; these links point at the commit this page was built from.
Terraskipper-V2: common questions
What microcontroller does the Terraskipper-V2 use?
The Terraskipper-V2 is built around the RaspberryPi_Pico_2_W, from the Raspberry Pi family.
How big is the Terraskipper-V2 PCB?
The Terraskipper-V2 measures 51 × 85 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Terraskipper-V2?
20 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Terraskipper-V2 design files?
From the ZIZO932/Terraskipper-V2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Terraskipper-V2 design in my own project?
The repository has no license, so all rights stay with ZIZO932. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Terraskipper-V2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
Similar boards
Raspberry Pi
Open source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7kRaspberry Pi
Iot
dotnet
56 × 65 mm24 parts2LMIT2.4kRaspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kRaspberry Pi
CM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0kRaspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license673Raspberry Pi
Phased
Neumi
75 × 100 mm71 parts2LNo license507