Rvm interface
zk946190-ui·rvm-interface-pcb
About the Rvm interface PCB
Rvm interface is an open source PCB design by zk946190-ui, published on GitHub. It is a 2-layer board measuring 90 × 70 mm, with 21 components from 20 distinct parts.
By type, the board carries 11 connectors, 4 resistors, 3 diodes, 2 capacitors and 1 transistor.
It belongs with the robotics & motion and sensors designs in this gallery.
From the project
KiCad schematic and PCB layout for an interface board that connects an Arduino Mega to the sensors, actuators and communication modules of a Reverse Vending Machine (RVM). The board replaces breadboard and loose-wire connections with one organised PCB.
KiCad schematic and PCB layout for an interface board that connects an Arduino Mega to the sensors, actuators and communication modules of a Reverse Vending Machine (RVM). The board replaces breadboard and loose-wire connections with one organised PCB.
Status: Rev 1 design, not fabricated and not tested on hardware yet. See Progress.
The board is routed on the top and bottom copper layers, with four M3 mounting holes (3.2 mm).
Rvm interface bill of materials (BOM)
21 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BC547 | TO-92_Inline | Q1 |
| 1 | MEGA_LINK | PinHeader_2x13_P2.54mm_Vertical | J1 |
| 1 | LCD | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | HX711 | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | KEYPAD | PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | METAL_SENSOR | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | SERVO_SELECT | PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | SERVO_DROP | PinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | BLUETOOTH | PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | GSM | PinHeader_1x04_P2.54mm_Vertical | J9 |
| 1 | POWER_IN | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J10 |
| 1 | BUZZER | PinHeader_1x02_P2.54mm_Vertical | J11 |
| 1 | 1N5819 | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D2 |
| 1 | LED | LED_D3.0mm | D3 |
| 1 | 0.1uF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 1000uF | CP_Radial_D10.0mm_P5.00mm | C2 |
| 1 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 2 | 1K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3 |
| 1 | 2.2K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
Rvm interface design files
The KiCad project lives in the zk946190-ui/rvm-interface-pcb repository on GitHub; these links point at the commit this page was built from.
Rvm interface: common questions
How big is the Rvm interface PCB?
The Rvm interface measures 90 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Rvm interface?
21 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Rvm interface design files?
From the zk946190-ui/rvm-interface-pcb repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Rvm interface design in my own project?
The repository has no license, so all rights stay with zk946190-ui. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k