Kaseta
About the Kaseta PCB
Kaseta is an open source PCB design by zlosynth, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 99.1 × 109.2 mm, with 70 components from 30 distinct parts.
Other key parts include the Daisy_Patch_SM and 4051. By type, the board carries 14 resistors, 11 diodes, 10 connectors, 5 capacitors, 4 ICs and 2 inductors.
It belongs with the audio designs in this gallery.
From the project
Saturating tape delay and feedback sculptor.
Saturating tape delay and feedback sculptor module for Eurorack.
Delay with 4 reading heads Up to 5 minutes of audio recording Tape saturation simulation Wow and flutter effects Tone control Voltage-controlled oscillator Trigger sequencer Stereo output LEDs visualizing dialed parameters Based around Electro-Smith's Daisy Patch SM platform * Programmed in Rust
Main components on the Kaseta
Kaseta bill of materials (BOM)
70 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Daisy_Patch_SM | DaisySM_4_Connfly | U1 |
| 3 | 4051 | SOIC-16_3.9x9.9mm_P1.27mm | U2, U3, U4 |
| 1 | In | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J1 |
| 1 | Impulse | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J2 |
| 1 | Left | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J3 |
| 1 | Right | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J4 |
| 1 | Ctrl1 | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J5 |
| 1 | Ctrl2 | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J6 |
| 1 | Ctrl3 | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J7 |
| 1 | Ctrl4 | Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J8 |
| 1 | I2C | PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | Power | Power_Connector_Connfly | J13 |
| 5 | B10k | Potentiometer_Alpha | RV1, RV2, RV3, RV4, RV5 |
| 4 | B10k | Potentiometer_Alpha_RA3043F-20-20D1-B10K-01 | RV6, RV7, RV8, RV9 |
| 14 | B10k | Potentiometer_Trimmer_SongHuei | RV10, RV11, RV12, RV13, RV14, RV15, RV16, RV17 +6 |
| 1 | Button | SW_PUSH_6mm | SW2 |
| 1 | LED_1 | LED_D3.0mm | D1 |
| 1 | LED_2 | LED_D3.0mm | D2 |
| 1 | LED_3 | LED_D3.0mm | D3 |
| 1 | LED_4 | LED_D3.0mm | D4 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LED_5 | LED_D3.0mm | D5 |
| 1 | LED_6 | LED_D3.0mm | D6 |
| 1 | LED_7 | LED_D3.0mm | D7 |
| 2 | LED_8 | LED_D3.0mm | D8, D9 |
| 2 | D_Schottky_Small | D_SOD-123 | D10, D11 |
| 2 | 0R | L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | FB1, FB2 |
| 2 | 10u | CP_Elec_5x5.8 | C1, C2 |
| 3 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5, C6 |
| 9 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8 +1 |
| 5 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R11, R13, R14, R25 |
Kaseta design files
The KiCad project lives in the zlosynth/kaseta repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/Module.kicad_pcb
- Schematichardware/Module.kicad_sch
Kaseta: common questions
How big is the Kaseta PCB?
The Kaseta measures 99.1 × 109.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Kaseta?
70 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the Kaseta design files?
From the zlosynth/kaseta repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Kaseta design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which zlosynth chose for the repository.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
ButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956
USB
52 × 12.6 mm6 parts2LApache-2.0956
Pots
390 × 93 mm75 parts2LApache-2.0956
PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800
Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687