BibleButton2026Firmware
zoidsterence·BibleButton2026Firmware·design/BibleButton2026_PCB/BibleButton2026_PCB.kicad_sch
About the BibleButton2026Firmware PCB
BibleButton2026Firmware is an open source Microchip SAM PCB design by zoidsterence, published on GitHub. It is a board, with 44 components from 27 distinct parts.
Its main chip is the ATSAMD21G18A-MU, from the Microchip SAM family. Other key parts include the MAX98357AETE_T, LD29150DT33R, DMP3125L-7 and SI2305CDS-T1-GE3. By type, the board carries 14 capacitors, 8 resistors, 5 ICs, 4 battery holders, 3 connectors and 3 switches.
Main components on the BibleButton2026Firmware
BibleButton2026Firmware bill of materials (BOM)
44 components, 27 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATSAMD21G18A-MU | QFN50P700X700X90-49N | U1 |
| 1 | MAX98357AETE_T | QFN50P300X300X80-17N | U2 |
| 1 | LD29150DT33R | DPAK456P972X240-3N | U3 |
| 1 | DMP3125L-7 | SOT23 | U4 |
| 1 | SI2305CDS-T1-GE3 | SI2305CDS_T1_GE3 | U5 |
| 1 | ECS-.327-12.5-34S ECS-.327-12.5-34S-TR | XTAL_ECS-.327-12.5-34S-TR | Y1 |
| 1 | UJ20-C-V-G-SMT-2-P16 UJ20-C-V-G-SMT-2-P16-TR | UJ20-C-V-G-SMT-2-P16-TR | J1 |
| 1 | MEM2067-02-180-00-A_REVB | GCT_MEM2067-02-180-00-A_REVB | J2 |
| 1 | TC2050-IDC | TAG-CONNECT_TC2050-IDC | J3 |
| 4 | AAA | BT1, BT2, BT3, BT4 | |
| 1 | SS8P6C-M3/86A | SS8P6C-M3_86A | CR1 |
| 1 | AS04004PO-WR-R | SP1 | |
| 1 | TS06-667-50-R-260-G-SMT TS06-667-50-R-260-G-SMT-TR | SW_TS06-667-50-R-260-G-SMT-TR | SW1 |
| 2 | 1825027-1 | SW2_1825027-A_TEC | SW2, SW3 |
| 1 | D12V0L1B2LP-7B | DIO_BZT52C3V3LP-7 | D1 |
| 1 | ~ | DIO_MM3Z3V0B | D2 |
| 1 | 120 Ohms @ 100 MHz 1.8A | FB1 | |
| 1 | 120 Ohms @ 100MHz 1.8A | FB2 | |
| 1 | 10uF 35V | C_0805_2012Metric | C1 |
| 1 | 22uF 16V | C_0805_2012Metric | C2 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 9 | 100nF 16V | C_0402_1005Metric | C3, C4, C5, C6, C7, C8, C12, C13 +1 |
| 1 | 10uF 16V | C_0603_1608Metric | C9 |
| 2 | 22pF 16V | C_0402_1005Metric | C10, C11 |
| 2 | 5.1k 1% | R_0402_1005Metric | R1, R2 |
| 4 | 100k 1% | R_0402_1005Metric | R3, R6, R7, R8 |
| 1 | 1k 1% | R_0402_1005Metric | R4 |
| 1 | 10K 10k | R_0402_1005Metric | R5 |
BibleButton2026Firmware design files
The KiCad project lives in the zoidsterence/BibleButton2026Firmware repository on GitHub; these links point at the commit this page was built from.
BibleButton2026Firmware: common questions
What microcontroller does the BibleButton2026Firmware use?
The BibleButton2026Firmware is built around the ATSAMD21G18A-MU, from the Microchip SAM family.
How many components are on the BibleButton2026Firmware?
44 components, from 27 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the BibleButton2026Firmware design files?
From the zoidsterence/BibleButton2026Firmware repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the BibleButton2026Firmware design in my own project?
The repository has no license, so all rights stay with zoidsterence. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the BibleButton2026Firmware without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416