12 open source boards using the MAX98357AETE_T
Real designs built with the MAX98357AETE_T, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Inercia floppy badge
afonsus1997
90 × 97 mm76 parts2LNo license11ESP32
Mlehaptics
lemonforest
37.3 × 27.8 mm29 parts2LGPL-3.07ESP32
Kuhglocke GS
Queens-Rocket-Engineering-Team
65 × 70 mm115 parts2LNo license1ESP32
FreeX
hancho6319
33.5 × 23 mm46 parts2LNo license0ESP32
AVA-GEM
alrazzi1
68.6 × 23.3 mm32 parts2LNo license0Pcbvr left
SINRG-Lab
58.6 × 12.9 mm28 parts2LNo license0- schematic only · 44 partsMicrochip SAM
BibleButton2026Firmware
zoidsterence
44 partsNo license0 ESP32
Handheld GS
Queens-Rocket-Engineering-Team
65 × 70 mm99 parts2LNo license1Pcb right
SINRG-Lab
40 × 20.2 mm14 parts2LNo license0ESP32
Kuhglocke GS
Queens-Rocket-Engineering-Team
65 × 70 mm115 parts2LNo license3ESP32
Kuhglocke GS
Queens-Rocket-Engineering-Team
65 × 70 mm115 parts2LNo license1ESP32
Handheld GS
Queens-Rocket-Engineering-Team
65 × 70 mm99 parts2LNo license1
How designs wire the MAX98357AETE_T
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the MAX98357AETE_T connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 7 of 8 designs, most often 10 µF (then 100 nF).
- The VDD__1 pin has a decoupling capacitor on 7 of 8 designs, most often 10 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 3 | Connected to: GND 88% | — |
| SD_MODEpin 4 | Connected to: Signal 63% · not connected 25% |
|
| NCpin 5, 6, 12, 13 | Connected to: Not connected 88% | — |
| VDDpin 7 | Connected to: 3.3V 75% |
|
| VDD__1pin 8 | Connected to: 3.3V 75% |
|
| GND__1pin 11 | Connected to: GND 88% | — |
| GND__2pin 15 | Connected to: GND 100% | — |
| EPpin 17 | Connected to: GND 100% | — |
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Inercia floppy badge by afonsus1997, Mlehaptics by lemonforest, Kuhglocke GS by Queens-Rocket-Engineering-Team and Handheld GS by Queens-Rocket-Engineering-Team.
The MAX98357AETE_T in open source designs
The gallery holds 12 open source boards using the MAX98357AETE_T from 9 GitHub repositories; a typical one measures about 65 × 70 mm and carries around 61 components.
100% are two-layer designs, the rest use four layers or more, and 8% carry an open source license.
The most starred is Inercia floppy badge by afonsus1997.
Parts used alongside the MAX98357AETE_T
Microcontrollers on boards using the MAX98357AETE_T
What boards using the MAX98357AETE_T are built for
MAX98357AETE_T: common questions
Where can I find a MAX98357AETE_T reference design?
Each of the 12 boards on this page is a real design using the MAX98357AETE_T. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MAX98357AETE_T VDD pin?
The VDD pin has a decoupling capacitor on 7 of 8 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the MAX98357AETE_T.
What decoupling capacitors do designs use on the MAX98357AETE_T VDD__1 pin?
The VDD__1 pin has a decoupling capacitor on 7 of 8 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the MAX98357AETE_T.
What parts are used alongside the MAX98357AETE_T?
The ACS70331EOLC, AMS1117-3.3, CP2102N-Axx-xQFN28, ESP32-S3-WROOM-1 and LM66100DCKR appear in the most repositories here.
Which microcontrollers do boards using the MAX98357AETE_T use?
Most are built on ESP32 (8), RP2040/RP2350 (1) and Microchip SAM (1).
How big is a typical board using the MAX98357AETE_T?
The median is 65 × 70 mm, and 100% are two-layer designs.
What is the most popular open source board using the MAX98357AETE_T?
By GitHub stars, Inercia floppy badge by afonsus1997, with 11 stars.
Can I simulate one of these boards using the MAX98357AETE_T before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.