3 open source boards using the SN74LS32N

Real designs built with the SN74LS32N, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The SN74LS32N in open source designs

The gallery holds 3 open source boards using the SN74LS32N from 3 GitHub repositories; a typical one measures about 76.2 × 74.3 mm and carries around 35 components.

100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is PCPI AppliCard by baldengineer.

Parts used alongside the SN74LS32N

Microcontrollers on boards using the SN74LS32N

What boards using the SN74LS32N are built for

SN74LS32N: common questions

Where can I find a SN74LS32N reference design?

Each of the 3 boards on this page is a real design using the SN74LS32N. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the SN74LS32N use?

Most are built on AVR/Arduino (1).

How big is a typical board using the SN74LS32N?

The median is 76.2 × 74.3 mm, and 100% are two-layer designs.

What is the most popular open source board using the SN74LS32N?

By GitHub stars, PCPI AppliCard by baldengineer, with 442 stars.

Can I simulate one of these boards using the SN74LS32N before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part