Yukuyuku ESP32DevKitC CompatibleV1

zukki4123·yukuyuku_ESP32DevKitC_CompatibleV1

Yukuyuku ESP32DevKitC CompatibleV1 PCB layout, top view — open source ESP32 board by zukki4123

About the Yukuyuku ESP32DevKitC CompatibleV1 PCB

Yukuyuku ESP32DevKitC CompatibleV1 is an open source ESP32 PCB design by zukki4123, published on GitHub under the MIT license. It is a 2-layer board measuring 27 × 48 mm, with 26 components from 14 distinct parts.

Its main chip is the ESP32-WROOM-32E, from the ESP32 family. Other key parts include the AZ1117CH-3.3TRG1. By type, the board carries 7 resistors, 6 capacitors, 3 ICs, 3 connectors, 3 diodes and 2 transistors.

From the project

ESP32DevKitCボードの互換機です。純正の二分の一ほどの値段で作れます。

Main components on the Yukuyuku ESP32DevKitC CompatibleV1

Yukuyuku ESP32DevKitC CompatibleV1 bill of materials (BOM)

26 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
~
IC1
1
ESP32-WROOM-32E
U1
1
AZ1117CH-3.3TRG1
AZ1117CH-3_3TRG1
Diodes Incorporated
U2
2
Q_NPN_BEC
Q1, Q2
1
USB_B_Micro
J1
2
CONN_01X19
Conn_01x19
J2, J3
2
SW_Push
SW1, SW2
2
LED_yellow
D1, D2
1
LED_red
D3
4
0.1UF
0.1uF
C1, C2, C3, C4
1
10UF
10uF
C5
1
22UF
22uF
C6
4
10K
10k
R1, R2, R3, R4
3
1k
R5, R6, R7

Yukuyuku ESP32DevKitC CompatibleV1 design files

The KiCad project lives in the zukki4123/yukuyuku_ESP32DevKitC_CompatibleV1 repository on GitHub; these links point at the commit this page was built from.

Yukuyuku ESP32DevKitC CompatibleV1: common questions

What microcontroller does the Yukuyuku ESP32DevKitC CompatibleV1 use?

The Yukuyuku ESP32DevKitC CompatibleV1 is built around the ESP32-WROOM-32E, from the ESP32 family.

How big is the Yukuyuku ESP32DevKitC CompatibleV1 PCB?

The Yukuyuku ESP32DevKitC CompatibleV1 measures 27 × 48 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Yukuyuku ESP32DevKitC CompatibleV1?

26 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Yukuyuku ESP32DevKitC CompatibleV1 design files?

From the zukki4123/yukuyuku_ESP32DevKitC_CompatibleV1 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Yukuyuku ESP32DevKitC CompatibleV1 design in my own project?

Yes, under the terms of its MIT license, which zukki4123 chose for the repository.

Can I test firmware for the Yukuyuku ESP32DevKitC CompatibleV1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards