Yukuyuku UDPI ProgrammerV1
zukki4123·yukuyuku_UDPI_ProgrammerV1
About the Yukuyuku UDPI ProgrammerV1 PCB
Yukuyuku UDPI ProgrammerV1 is an open source PCB design by zukki4123, published on GitHub under the MIT license. It is a 2-layer board measuring 30 × 20 mm, with 18 components from 13 distinct parts.
Other key parts include the AP7333-33SAG-7 and CH340E. By type, the board carries 5 resistors, 4 capacitors, 3 diodes, 2 ICs, 2 connectors and 1 fuse.
It belongs with the usb & debug tools designs in this gallery.
From the project
AVRマイコンのUDPI書き込みを行うことができます。
Main components on the Yukuyuku UDPI ProgrammerV1
Yukuyuku UDPI ProgrammerV1 bill of materials (BOM)
18 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP7333-33SAG-7 | TSOT-23 | IC1 |
| 1 | CH340E | MSOP-10_3x3mm_P0.5mm | U1 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | 350mA | Fuse_0402_1005Metric | F1 |
| 1 | SW_SPDT | SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW1 |
| 2 | LED | LED_0603_1608Metric | D1, D2 |
| 1 | 1N4148 | D_SOD-123 | D3 |
| 2 | 1uF | C_0603_1608Metric | C1, C2 |
| 2 | 0.1uF | C_0402_1005Metric | C3, C4 |
| 2 | 5.1k | R_0603_1608Metric | R1, R2 |
| 2 | 1k | R_0603_1608Metric | R3, R4 |
| 1 | 470R | R_0603_1608Metric | R5 |
Yukuyuku UDPI ProgrammerV1 design files
The KiCad project lives in the zukki4123/yukuyuku_UDPI_ProgrammerV1 repository on GitHub; these links point at the commit this page was built from.
- LayoutUDPI_Programmer.kicad_pcb
- SchematicUDPI_Programmer.kicad_sch
Yukuyuku UDPI ProgrammerV1: common questions
How big is the Yukuyuku UDPI ProgrammerV1 PCB?
The Yukuyuku UDPI ProgrammerV1 measures 30 × 20 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Yukuyuku UDPI ProgrammerV1?
18 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Yukuyuku UDPI ProgrammerV1 design files?
From the zukki4123/yukuyuku_UDPI_ProgrammerV1 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Yukuyuku UDPI ProgrammerV1 design in my own project?
Yes, under the terms of its MIT license, which zukki4123 chose for the repository.
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0497Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter tsop48 solder
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter soic8 solder
bbogush
48 × 20 mm3 parts2LGPL-3.0389