Blr
0x007E·blr·pcb/BLR.kicad_pcb
About the Blr PCB
Blr is an open source PCB design by 0x007E, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 106 × 50 mm, with 41 components from 24 distinct parts.
Other key parts include the TL431LP, PB13V7 and LM358. By type, the board carries 19 resistors, 8 connectors, 4 ICs, 4 capacitors, 2 diodes and 1 fuse.
It belongs with the power & battery designs in this gallery.
From the project
Lead-Battery Charger
The BLR project is based on a pcb with a positive voltage regulator for battery charging (PB137). It can be used to charge lead-batteries with a voltage of 12V and observe the status of a battery during use.
There are two parts of the hardware. The pcb and the housing of the BLR. The pcb is created with KiCAD and the housing with FreeCAD. All files are built with github actions so that they are ready for a production environment. The housing is printed with a 3D-printer (Dremel 3D40).

Main components on the Blr
Blr bill of materials (BOM)
41 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TL431LP | TO-92_Wide | U1 |
| 1 | PB13V7 | TO-220-3_Vertical | U2 |
| 2 | LM358 | SOP-8_3.9x4.9mm_P1.27mm | U3, U4 |
| 1 | Screw_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 5 | Conn_01x02_Pin | WAGO_2060-402_998-404 | J2, J3, J4, J5, J8 |
| 2 | Conn_01x01_Pin | CONN_QC_RCPT_0.250 | J6, J7 |
| 1 | 2A | Fuseholder_Clip-5x20mm_Littelfuse_111_Inline_P20.00x5.00mm_D1.05mm_Horizontal | F1 |
| 2 | 10k | Potentiometer_Bourns_3296W_Vertical | RV1, RV2 |
| 1 | 20k | Potentiometer_Bourns_3314J_Vertical | RV3 |
| 1 | DO214AC | D_MELF | D1 |
| 1 | IN5820 | D_DO-201AD_P12.70mm_Horizontal | D2 |
| 1 | 1u | CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 10u | CP_Radial_D6.3mm_P2.50mm | C2 |
| 2 | 100n | C_1206_3216Metric | C3, C4 |
| 6 | 1k | R_1206_3216Metric | R1, R3, R4, R10, R11, R14 |
| 1 | 4k7 | R_1206_3216Metric | R2 |
| 2 | 1Meg | R_1206_3216Metric | R5, R6 |
| 1 | 560 | R_1206_3216Metric | R7 |
| 1 | 620 | R_1206_3216Metric | R8 |
| 2 | 820 | R_1206_3216Metric | R9, R16 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0R1 | R_Axial_Power_L20.0mm_W6.4mm_P22.40mm | R12 |
| 1 | 100k | R_1206_3216Metric | R13 |
| 1 | 1M | R_1206_3216Metric | R15 |
| 3 | 0 | R_1206_3216Metric | R17, R18, R19 |
Blr design files
The KiCad project lives in the 0x007E/blr repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/BLR.kicad_pcb
- Schematicpcb/BLR.kicad_sch
Blr: common questions
How big is the Blr PCB?
The Blr measures 106 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Blr?
41 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Blr design files?
From the 0x007E/blr repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Blr design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k