Isr
0x007E·isr·pcb/ISR.kicad_pcb
About the Isr PCB
Isr is an open source PCB design by 0x007E, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 77.5 × 50.8 mm, with 83 components from 25 distinct parts.
Other key parts include the 4011, 40106 and 4021. By type, the board carries 26 resistors, 20 transistors, 14 diodes, 12 connectors, 6 capacitors and 3 ICs.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Shift Register Development Board
The ISR is a board with an HEF4021B or any other compatible shift-register that meets the pin requirements. The board itself can be driven from 5 to 15V. The board offers the possibility to shift parallel input signals to a serial output clocked by buttons or an external signal from any other logic board.
The pcb is created with KiCAD. All files are built with github actions so that they are ready for a production environment.

Main components on the Isr
Isr bill of materials (BOM)
83 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4011 | SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | 40106 | SOIC-14_3.9x8.7mm_P1.27mm | U2 |
| 1 | 4021 | SOIC-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | BUK7880-55A | SOT-223-3_TabPin2 | Q1 |
| 10 | MMBFJ113 | SOT-23 | Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9 +2 |
| 9 | AO3400A | SOT-23-3 | Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17 +1 |
| 2 | Conn_01x10_Socket | PinSocket_1x10_P2.54mm_Vertical | J1, J3 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 6 | Conn_02x02_Counter_Clockwise | PinSocket_2x02_P2.54mm_Vertical | J4, J5, J6, J7, J8, J9 |
| 1 | Conn_01x02_Socket | PinSocket_1x02_P2.54mm_Vertical | J10 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J11 |
| 1 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J14 |
| 2 | SW_SPST | SW_SPST_PTS645 | SW1, SW2 |
| 5 | Green | LED_1206_3216Metric | D0, D1, D2, D3, D4 |
| 2 | Yellow | LED_1206_3216Metric | D5, D6 |
| 3 | Red | LED_1206_3216Metric | D7, D8, D13 |
| 3 | BAT43 | D_MiniMELF | D9, D11, D12 |
| 1 | BZ5V1 | D_MiniMELF | D10 |
| 1 | 10u | CP_Radial_D6.3mm_P2.50mm | C1 |
| 5 | 100n | C_1206_3216Metric | C2, C3, C4, C5, C6 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1k | R_1206_3216Metric | R1 |
| 2 | 10k | R_1206_3216Metric | R2, R16 |
| 5 | 4k7 | R_1206_3216Metric | R3, R4, R5, R6, R15 |
| 8 | 27R | R_1206_3216Metric | R7, R8, R9, R10, R11, R12, R13, R14 |
| 10 | 270 | R_1206_3216Metric | R17, R18, R19, R20, R21, R22, R23, R24 +2 |
Isr design files
The KiCad project lives in the 0x007E/isr repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/ISR.kicad_pcb
- Schematicpcb/ISR.kicad_sch
Isr: common questions
How big is the Isr PCB?
The Isr measures 77.5 × 50.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Isr?
83 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the Isr design files?
From the 0x007E/isr repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Isr design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979