8 open source boards using the 4021

Real designs built with the 4021, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the 4021

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the 4021 connects to, and the resistors, capacitors and other passives placed on it.

  • The Q5 pin is left unconnected on 8 of 8 designs.
  • The Q6 pin is left unconnected on 8 of 8 designs.
  • The D7 pin has a series resistor on 4 of 8 designs, most often 100 kΩ (then 27 Ω).
  • The D3 pin has a series resistor on 4 of 8 designs, most often 100 kΩ (then 27 Ω).
D7pin 1Connected to: A connector 50%
  • Series resistor on 50% · 100 kΩ (2), 27 Ω (1), 10 kΩ (1)
  • Resistor to GND on 38% · 1 MΩ (2)
Q5pin 2Connected to: Not connected 100%
D3pin 4Connected to: A connector 50%
  • Series resistor on 50% · 100 kΩ (2), 27 Ω (1), 10 kΩ (1)
  • Resistor to GND on 38% · 1 MΩ (2)
D2pin 5Connected to: A connector 50%
  • Series resistor on 50% · 100 kΩ (2), 27 Ω (1), 10 kΩ (1)
  • Resistor to GND on 38% · 1 MΩ (2), 1 kΩ (1)
D1pin 6Connected to: A connector 50%
  • Series resistor on 50% · 100 kΩ (2), 27 Ω (1), 10 kΩ (1)
  • Resistor to GND on 38% · 1 MΩ (2), 1 kΩ (1)
D0pin 7Connected to: A connector 50%
  • Series resistor on 50% · 100 kΩ (2), 27 Ω (1), 10 kΩ (1)
  • Resistor to GND on 38% · 1 MΩ (2), 1 kΩ (1)
VSSpin 8Connected to: GND 75%
Q6pin 12Connected to: Not connected 100%
D4pin 13Connected to: A connector 50%
  • Series resistor on 50% · 100 kΩ (2), 27 Ω (1), 10 kΩ (1)
  • Resistor to GND on 38% · 1 MΩ (2)
D5pin 14Connected to: A connector 50%
  • Series resistor on 50% · 10 kΩ (5), 100 kΩ (2), 27 Ω (1)
  • Resistor to GND on 38% · 1 MΩ (2)
D6pin 15Connected to: A connector 50%
  • Series resistor on 50% · 10 kΩ (5), 100 kΩ (2), 27 Ω (1)
  • Resistor to GND on 38% · 1 MΩ (2)
VDDpin 16Connected to: 3.3V 88%
  • Decoupling capacitor on 50% · 100 nF (4)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Kivu12 by ohmtech-rdi, Arduino stoerbert by MichaelThessel, Chisel nes by shino-hinaduki and Sonic rec9388-keyboard by atsidaev.

The 4021 in open source designs

The gallery holds 8 open source boards using the 4021 from 8 GitHub repositories; a typical one measures about 81.3 × 100.8 mm and carries around 104 components.

88% are two-layer designs, the rest use four layers or more, and 63% carry an open source license.

The most starred is Kivu12 by ohmtech-rdi.

Parts used alongside the 4021

Microcontrollers on boards using the 4021

What boards using the 4021 are built for

4021: common questions

Where can I find a 4021 reference design?

Each of the 8 boards on this page is a real design using the 4021. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the 4021 Q5 pin connected?

The Q5 pin is left unconnected on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the 4021.

How is the 4021 Q6 pin connected?

The Q6 pin is left unconnected on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the 4021.

What resistor goes on the 4021 D7 pin?

The D7 pin has a series resistor on 4 of 8 designs, most often 100 kΩ (then 27 Ω). Counted from the KiCad layouts of 8 open source designs using the 4021.

What parts are used alongside the 4021?

The 4051, PCA9685PW and TL072 appear in the most repositories here.

Which microcontrollers do boards using the 4021 use?

Most are built on AVR/Arduino (2).

How big is a typical board using the 4021?

The median is 81.3 × 100.8 mm, and 88% are two-layer designs.

What is the most popular open source board using the 4021?

By GitHub stars, Kivu12 by ohmtech-rdi, with 405 stars.

Can I simulate one of these boards using the 4021 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part