U3a
0x007E·u3a·pcb/U3A.kicad_pcb
About the U3a PCB
U3a is an open source PCB design by 0x007E, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 34.5 × 26.4 mm, with 36 components from 23 distinct parts.
Other key parts include the LD1117S33TR and FT232RL. By type, the board carries 15 resistors, 9 capacitors, 4 connectors, 3 diodes, 2 ICs and 1 transistor.
It belongs with the usb & debug tools and rf & radio designs in this gallery.
From the project
USB/UART/UPDI Adapter
The U3A project is based on a (FT232) that ist used as USB (Full Speed) to serial UART transceiver. Most signals of the (FT232) are routed to the connector pins J2 and J4. Whithin the DIP switches the adapter can be switched from UART to UPDI mode to program microcontrollers. It is possible to select between two voltage sources. Either 5V from USB or 3V3 from the internal LDO on the board.

Main components on the U3a
U3a bill of materials (BOM)
36 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LD1117S33TR | TO-252-3_TabPin2 | U1 |
| 1 | FT232RL | SSOP-28_5.3x10.2mm_P0.65mm | U2 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x07_Pin | PinHeader_1x07_P2.54mm_Vertical | J2 |
| 1 | USB_C | USB_C_Receptacle_GCT_USB4110 | J3 |
| 1 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | SW_DIP_x02 | SW_DIP_SPSTx02_Slide_6.7x6.64mm_W8.61mm_P2.54mm_LowProfile | SW1 |
| 1 | BAT43 | D_MiniMELF | D1 |
| 1 | Red | LED_1206_3216Metric | D2 |
| 1 | Green | LED_1206_3216Metric | D3 |
| 1 | FerriteBead_Small | L_1206_3216Metric | FB1 |
| 1 | 10n | C_1206_3216Metric | C1 |
| 2 | 10u | CP_EIA-6032-28_Kemet-C | C2, C5 |
| 5 | 100n | C_1206_3216Metric | C3, C4, C6, C7, C8 |
| 1 | 10u | C_1206_3216Metric | C9 |
| 6 | 1k | R_1206_3216Metric | R1, R5, R7, R8, R10, R12 |
| 1 | 10k | R_1206_3216Metric | R2 |
| 2 | 5k1 | R_1206_3216Metric | R3, R4 |
| 1 | 470 | R_1206_3216Metric | R6 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 27R | R_1206_3216Metric | R9, R11 |
| 1 | 330k | R_1206_3216Metric | R13 |
| 2 | 220 | R_1206_3216Metric | R14, R15 |
U3a design files
The KiCad project lives in the 0x007E/u3a repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/U3A.kicad_pcb
- Schematicpcb/U3A.kicad_sch
U3a: common questions
How big is the U3a PCB?
The U3a measures 34.5 × 26.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the U3a?
36 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the U3a design files?
From the 0x007E/u3a repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the U3a design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703Hat
pa3gsb
65 × 56 mm81 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675GoodPocketWatch
travisgoodspeed
75.2 × 101.2 mm56 parts2LNo license568