HardLabs

Esp-32-cyberpunk design

1mctrl·esp-32-cyberpunk-design

Esp-32-cyberpunk design PCB layout, top view — open source ESP32 board by 1mctrl

About the Esp-32-cyberpunk design PCB

Esp-32-cyberpunk design is an open source ESP32 PCB design by 1mctrl, published on GitHub. It is a 4-layer board measuring 55.7 × 33.3 mm, with 34 components from 19 distinct parts.

Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the CP2102N-Axx-xQFN28 and AMS1117-3.3. By type, the board carries 10 resistors, 9 capacitors, 5 diodes, 3 ICs, 3 connectors and 2 transistors.

It belongs with the iot & wireless designs in this gallery.

From the project

Design for ESP32 in Cyberpunk style

A custom PCB project based on the ESP32-WROOM-32 module, designed with a cyberpunk-inspired aesthetic. All source files are created in KiCad.

Esp-32-cyberpunk design, from the project README
From the project README

Main components on the Esp-32-cyberpunk design

ESP32-WROOM-32CP2102N-Axx-xQFN28AMS1117-3.3

Esp-32-cyberpunk design bill of materials (BOM)

34 components, 19 distinct parts.

QtyPartRefs
1
ESP32-WROOM-32
U1
1
CP2102N-Axx-xQFN28
U2
1
AMS1117-3.3
U3
2
SS8050
Q1, Q2
1
USB_B_Micro
J1
2
Conn_01x19_Pin
J2, J3
2
SW_Push
SW1, SW2
1
SD05_SOD323
D1
1
MBR0530
D2
2
ESD9B3.3ST5G
D3, D4
1
LED
D5
3
22uF/10v(20%)
C1, C6, C7
5
0.1uF/50V(10%)
C2, C3, C5, C8, C9
1
4.7uf/50V(10%)
C4
4
10K(5%)
R1, R5, R6, R7
2
2K(5%)
R2, R10
1
47.5K(5%)
R3
1
22.1K(5%)
R4
2
0R(5%)
R8, R9

Esp-32-cyberpunk design design files

The KiCad project lives in the 1mctrl/esp-32-cyberpunk-design repository on GitHub; these links point at the commit this page was built from.

Esp-32-cyberpunk design: common questions

What microcontroller does the Esp-32-cyberpunk design use?

The Esp-32-cyberpunk design is built around the ESP32-WROOM-32, from the ESP32 family.

How big is the Esp-32-cyberpunk design PCB?

The Esp-32-cyberpunk design measures 55.7 × 33.3 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Esp-32-cyberpunk design?

34 components, from 19 distinct parts. The full bill of materials is listed on this page.

Where can I download the Esp-32-cyberpunk design design files?

From the 1mctrl/esp-32-cyberpunk-design repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Esp-32-cyberpunk design design in my own project?

The repository has no license, so all rights stay with 1mctrl. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Esp-32-cyberpunk design without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards