2026 koreisai HW
22060·2026_koreisai_HW·circuit/circuit.kicad_pcb
About the 2026 koreisai HW PCB
2026 koreisai HW is an open source ESP32 PCB design by 22060, published on GitHub. It is a 2-layer board measuring 40 × 29 mm, with 22 components from 11 distinct parts.
Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the BNO085 and BD33FC0FP. By type, the board carries 10 capacitors, 7 resistors, 3 ICs and 2 connectors.
Main components on the 2026 koreisai HW
2026 koreisai HW bill of materials (BOM)
22 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BNO085 | BNO085 | IC1 |
| 1 | ESP32-C3-WROOM-02 | ESP32-C3-WROOM-02 | U1 |
| 1 | BD33FC0FP | TO-252-2 | U2 |
| 1 | USB_C_RECEPTACLE_USB2.0 USB_C_Receptacle_USB2.0 | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
| 1 | CONN_01X10_PIN Conn_01x10_Pin | PinHeader_1x10_P2.54mm_Vertical | J4 |
| 2 | 1u | C_0603_1608Metric | C1, C8 |
| 3 | 10U 10u | C_0603_1608Metric | C2, C4, C5 |
| 5 | 0.1U 0.1u | C_0603_1608Metric | C3, C6, C7, C9, C23 |
| 3 | 10K 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R6 |
| 2 | 4.7K 4.7k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R23, R24 |
2026 koreisai HW design files
The KiCad project lives in the 22060/2026_koreisai_HW repository on GitHub; these links point at the commit this page was built from.
2026 koreisai HW: common questions
What microcontroller does the 2026 koreisai HW use?
The 2026 koreisai HW is built around the ESP32-C3-WROOM-02, from the ESP32 family.
How big is the 2026 koreisai HW PCB?
The 2026 koreisai HW measures 40 × 29 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 2026 koreisai HW?
22 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the 2026 koreisai HW design files?
From the 22060/2026_koreisai_HW repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the 2026 koreisai HW design in my own project?
The repository has no license, so all rights stay with 22060. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the 2026 koreisai HW without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k