45 open source boards using the BNO085
Real designs built with the BNO085, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
NXP
Open mabel
robotmabel
95.5 × 83 mm73 parts2LApache-2.041Microchip SAM
Mainboard
AFS-pt
46.1 × 45.6 mm191 parts4LNo license15RP2040/RP2350
Pilot Oriented Navigation System
MasaoC
55.4 × 77.6 mm120 parts4LMIT15ESP32
Eidon tracker
Eidon-AI
29.5 × 24.3 mm17 parts2LNo license15RP2040/RP2350
Expansion board v4
naizhao
100 × 62 mm213 parts6LMIT11FPGA
IO-SDR
rishivg
99.4 × 60 mm309 parts8LCERN-OHL-S-2.010ESP32
USlime
ReSummit
25 × 22.6 mm37 parts2LGPL-3.04FPGA
IO SDR 1.1
SunnyYoshimitsu
91.5 × 91.5 mm268 parts6LNo license3Batteryboard bottom
PyCubed-Mini
45.6 × 45.6 mm49 parts2LNo license3ESP32
NX-ISD
Ghost3379
77 × 48.6 mm108 parts4LGPL-3.02ESP32
UWB Module ESP IDF
victorstoica114
71 × 64 mm248 parts4LNo license1STM32
IRIS
codinga593
80 × 80 mm129 parts6LNo license1ESP32
Motorcycle telemetry unit
Data-ptr
133.8 × 95.4 mm109 parts2LUnlicense1- schematic only · 5 partsESP32
Smart glasses ai
yashanandingole12-gif
5 partsNo license1 TI MSP430/CC
PROC091G
um-kiho
115.3 × 25.3 mm440 parts8LNo license0RP2040/RP2350
Rp2040 robotronix v 1.1
bm6t
130 × 75 mm185 parts4LNo license0Raspberry Pi
X17-pi cm hat - -
purduerov
9.3 × 6.9 mm177 parts4LNo license0STM32
Nereus Pi shield ADIN2111
nickraymond
62 × 37 mm161 parts6LNo license0STM32
6 layer MCU
BaktiyarBr
50 × 50 mm71 parts6LNo license0ESP32
Esp
akseliahonpera
86 × 75 mm61 parts2LNo license0RP2040/RP2350
Robot motherboard
enph253-2025-team5
129.3 × 78.7 mm58 parts2LGPL-3.00ESP32
MainBoardV3.1FormB
Unimakers
120 × 120 mm51 parts4LNo license0ESP32
Notahawk
bimmui
115.9 × 61.5 mm50 parts2LNo license0ESP32
The-Real-Watch
JHPate1
37.5 × 37.5 mm48 parts2LNo license0ESP32
Esp32 bno085
nemonamo
24.5 × 53.4 mm36 parts2LNo license0ESP32
PACC
AwesomeSno
60 × 40 mm34 parts2LNo license0ESP32
2026 koreisai HW
22060
40 × 29 mm22 parts2LNo license0ESP32
SlimeVR Tracker for ESP32C3 WROOM
Parabellum-Maker
42 × 48.1 mm20 parts2LNo license0- schematic only · 369 partsRaspberry Pi
PiCubed
NeilKhera
369 parts2LNo license0 - schematic only · 6 partsSTM32
Nvidia
Lokesh-Tech09
6 partsNo license0 ESP32
USlime PCB Pack
ReSummit
25 × 22.6 mm30 parts2LGPL-3.04Wooden Smart Clock — sensor board
tibm30 × 16 mm29 parts4LNo license1TI MSP430/CC
PROC091F
um-kiho
1.9 × 1.9 mm414 parts8LNo license0STM32
BM Mote 000639-AB
nickraymond
62 × 37 mm161 parts6LNo license0ESP32
CanSat2
budabalint
40 × 40 mm102 parts4LNo license0ESP32
Esp.gnss
akseliahonpera
100 × 100 mm61 parts2LNo license0
How designs wire the BNO085
Read from the KiCad layouts of 32 open source designs, one per repository: what each pin of the BNO085 connects to, and the resistors, capacitors and other passives placed on it.
- The CAP pin has a capacitor to GND on 26 of 29 designs, most often 100 nF (then 1 µF).
- The RESV_NC pins is left unconnected on 98% of them (3.3V on 3, a signal on 3).
- The VDD pin has a decoupling capacitor on 21 of 30 designs, most often 100 nF (then 10 µF).
- The VDDIO pin has a decoupling capacitor on 21 of 26 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| RESV_NCpin 1, 7, 8, 12, 13, 21, 22, 23, 24 | Connected to: Not connected 98% | — |
| GNDpin 2 | Connected to: GND 94% | — |
| VDDpin 3 | Connected to: 3.3V 87% |
|
| BOOTNpin 4 | Connected to: The microcontroller 23% · 3.3V 17% |
|
| CAPpin 9 | Connected to: Signal 90% |
|
| NRSTpin 11 | Connected to: The microcontroller 50% |
|
| ENV_SCLpin 15 | Connected to: Signal 54% · not connected 42% |
|
| ENV_SDApin 16 | Connected to: Signal 54% · not connected 42% |
|
| H_SCL/SCK/RXpin 19 | Connected to: The microcontroller 65% |
|
| H_SDA/H_MISO/TXpin 20 | Connected to: The microcontroller 65% |
|
| GNDIOpin 25 | Connected to: GND 96% | — |
| XOUT32/CLKSEL1pin 26 | Connected to: Signal 62% · not connected 19% · GND 19% |
|
| XIN32pin 27 | Connected to: Signal 65% · not connected 35% |
|
| VDDIOpin 28 | Connected to: 3.3V 96% |
|
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Open mabel by robotmabel, Mainboard by AFS-pt, Eidon tracker by Eidon-AI and Pilot Oriented Navigation System by MasaoC.
The BNO085 in open source designs
The gallery holds 45 open source boards using the BNO085 from 35 GitHub repositories; a typical one measures about 57.2 × 49.3 mm and carries around 61 components.
53% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is Open mabel by robotmabel.
Parts used alongside the BNO085
Microcontrollers on boards using the BNO085
What boards using the BNO085 are built for
BNO085: common questions
Where can I find a BNO085 reference design?
Each of the 45 boards on this page is a real design using the BNO085. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the BNO085 CAP pin connected?
The CAP pin has a capacitor to GND on 26 of 29 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 32 open source designs using the BNO085.
How is the BNO085 RESV_NC pin connected?
The RESV_NC pins is left unconnected on 98% of them (3.3V on 3, a signal on 3). Counted from the KiCad layouts of 32 open source designs using the BNO085.
What decoupling capacitors do designs use on the BNO085 VDD pin?
The VDD pin has a decoupling capacitor on 21 of 30 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 32 open source designs using the BNO085.
What parts are used alongside the BNO085?
The ESP32-S3-WROOM-1, MS5611-01BA, AMS1117-3.3, BME280 and 74LVC1G07SE-7 appear in the most repositories here.
Which microcontrollers do boards using the BNO085 use?
Most are built on ESP32 (21), STM32 (6), RP2040/RP2350 (4) and Raspberry Pi (2).
How big is a typical board using the BNO085?
The median is 57.2 × 49.3 mm, and 53% are two-layer designs.
What is the most popular open source board using the BNO085?
By GitHub stars, Open mabel by robotmabel, with 41 stars.
Can I simulate one of these boards using the BNO085 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.