Matchgroup test routed
2AMLogic·kicad-tools·boards/07-matchgroup-test/output/matchgroup_test_routed.kicad_pcb
About the Matchgroup test routed PCB
Matchgroup test routed is an open source STM32 PCB design by 2AMLogic, published on GitHub under the MIT license. It is a 6-layer board measuring 100 × 80 mm, with 43 components from 17 distinct parts.
Its main chip is the STM32F429ZIT6, from the STM32 family. Other key parts include the IS42S16400J-6TLI and AP2112K-3.3TRG1. By type, the board carries 30 capacitors, 5 resistors, 3 ICs, 3 connectors and 2 diodes.
From the project
Standalone Python tools for parsing and manipulating KiCad schematic and PCB files
A standalone STM32F429ZIT6 MCU tests an IS42S16400J-6TLI-TR x16 SDR SDRAM. The real circuit replaces the former synthetic DDR/MIPI/HDMI routing fixture. It uses a six-layer board, 43 purchasable components and 216 connected pads. Firmware runs the MCU at 96 MHz and the memory at 48 MHz, tests all 8 MiB, and reports through status LEDs and a 3.3 V UART.
Manufacturing readiness is recorded in output/readiness.json and verified against the exact source, rules, evidence and exported package. Use output/manufacturing.zip only when that report is current and Ready. Hardware testing remains…
Main components on the Matchgroup test routed
Matchgroup test routed bill of materials (BOM)
43 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F429ZIT6 | LQFP-144_20x20mm_P0.5mm | U1 |
| 1 | IS42S16400J-6TLI IS42S16400J-6TLI-TR | TSOP-II-54_22.2x10.16mm_P0.8mm | U2 |
| 1 | AP2112K-3.3TRG1 | SOT-23-5 | U3 |
| 1 | 5V_INPUT | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | SWD_3V3 | PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | UART_3V3 | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | C125094 GREEN | LED_0603_1608Metric | D1 |
| 1 | C94869 RED | LED_0603_1608Metric | D2 |
| 21 | 100NF 100nF | C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8 +13 |
| 2 | 4.7UF 4.7uF | C_0603_1608Metric | C20, C21 |
| 1 | 1UF 1uF | C_0603_1608Metric | C23 |
| 2 | 2.2UF 2.2uF | C_0603_1608Metric | C24, C25 |
| 2 | 10UF 10uF | C_0603_1608Metric | C26, C27 |
| 2 | 10NF 10nF | C_0603_1608Metric | C29, C30 |
| 1 | C21189 0R | R_0603_1608Metric | R1 |
| 2 | 10K 10k | R_0603_1608Metric | R2, R3 |
| 2 | 1k | R_0603_1608Metric | R4, R5 |
Matchgroup test routed design files
The KiCad project lives in the 2AMLogic/kicad-tools repository on GitHub; these links point at the commit this page was built from.
Matchgroup test routed: common questions
What microcontroller does the Matchgroup test routed use?
The Matchgroup test routed is built around the STM32F429ZIT6, from the STM32 family.
How big is the Matchgroup test routed PCB?
The Matchgroup test routed measures 100 × 80 mm, has 6 copper layers and is 1.6 mm thick.
How many components are on the Matchgroup test routed?
43 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Matchgroup test routed design files?
From the 2AMLogic/kicad-tools repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Matchgroup test routed design in my own project?
Yes, under the terms of its MIT license, which 2AMLogic chose for the repository.
Can I test firmware for the Matchgroup test routed without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in kicad-tools
USB-C PD 5V supply — development
2AMLogic
100 × 65 mm47 parts4LMIT77STM32
Matchgroup test
2AMLogic
100 × 80 mm43 parts6LMIT77AVR/Arduino
Bldc controller routed
2AMLogic
70 × 90 mm42 parts4LMIT77AVR/Arduino
Bldc controller
2AMLogic
70 × 90 mm42 parts4LMIT77AVR/Arduino
Usb joystick
2AMLogic
80 × 60 mm38 parts4LMIT77AVR/Arduino
Usb joystick routed
2AMLogic
80 × 60 mm38 parts4LMIT77Four channel LVDS link demonstrator
2AMLogic
90 × 70 mm36 parts4LMIT77STM32
STM32F103C8 Development Board
2AMLogic
60 × 40 mm17 parts2LMIT77STM32
Mains fixture
2AMLogic
70 × 52 mm9 parts2LMIT77STM32
Negotiated stage
2AMLogic
70 × 52 mm9 parts2LMIT77
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k