3 open source boards using the STM32F429ZIT6
Real designs built with the STM32F429ZIT6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
EIM
bhorst519
170.6 × 121.1 mm226 parts2LNo license3STM32
Matchgroup test
rjwalters
100 × 80 mm43 parts6LMIT74STM32
Matchgroup test routed
rjwalters
100 × 80 mm43 parts6LMIT74
The STM32F429ZIT6 in open source designs
The gallery holds 3 open source boards using the STM32F429ZIT6 from 2 GitHub repositories; a typical one measures about 100 × 80 mm and carries around 43 components.
67% use four copper layers or more, and 67% carry an open source license.
The most starred is Matchgroup test by rjwalters.
Microcontrollers on boards using the STM32F429ZIT6
STM32F429ZIT6: common questions
Where can I find a STM32F429ZIT6 reference design?
Each of the 3 boards on this page is a real design using the STM32F429ZIT6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the STM32F429ZIT6 use?
Most are built on STM32 (3).
How big is a typical board using the STM32F429ZIT6?
The median is 100 × 80 mm, and 33% are two-layer designs.
What is the most popular open source board using the STM32F429ZIT6?
By GitHub stars, Matchgroup test by rjwalters, with 74 stars.
Can I simulate one of these boards using the STM32F429ZIT6 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.