Bldc controller

2AMLogic·kicad-tools·boards/05-bldc-motor-controller/output/bldc_controller.kicad_pcb

Bldc controller PCB layout, top view — open source AVR/Arduino board by 2AMLogic

About the Bldc controller PCB

Bldc controller is an open source AVR/Arduino PCB design by 2AMLogic, published on GitHub under the MIT license. It is a 4-layer board measuring 70 × 90 mm, with 42 components from 23 distinct parts.

Its main chip is the ATMEGA328P-AU, from the AVR/Arduino family. Other key parts include the DRV8313PWPR and TPS7A1650DGNR. By type, the board carries 16 capacitors, 13 resistors, 5 connectors, 3 ICs, 3 diodes and 1 fuse.

It belongs with the robotics & motion designs in this gallery.

From the project

Standalone Python tools for parsing and manipulating KiCad schematic and PCB files

Revision B is a real 42-component, 70 × 90 mm, four-layer small-motor controller: ATmega328P-AU, DRV8313PWPR integrated triple half bridge, and TPS7A1650DGNR 5 V supply. It includes reverse-input protection, fuse, transient clamp, charge-pump capacitors, current comparator, Hall inputs, AVR ISP, RUN switch input, speed trimmer and working commutation firmware.

Main components on the Bldc controller

Bldc controller bill of materials (BOM)

42 components, 23 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATMEGA328P-AU
ATmega328P-AU
U1
1
DRV8313PWPR
U2
1
TPS7A1650DGNR
U3
1
ZX-PZ2.54-1-2PZZ
12-24V INPUT
J1
1
2.54-1*3P
MOTOR ABC
J2
1
2.54-1*6P
HALL
J3
1
2.54-2*3P
AVR ISP
J4
1
ZX-PZ2.54-1-2PZZ
RUN SWITCH
J5
1
SF-1206S100-2
1A 63V
F1
1
3296W-1-103LF
10k
RV1
1
SS36
D1
1
SMBJ24A
D2
1
NCD0805R1
RED
D3
1
EEEFT1H221AP
220uF 50V
C1
10
CC0805KRX7R9BB104
100nF
C2, C3, C5, C9, C10, C11, C12, C14 +2
2
CL21B103KBANNNC
10nF
C4, C13
1
CL21B474KBFNNNE
470nF
C6
1
CL21B105KBFNNNE
1uF
C7
1
CL21A106KAYNNNE
10uF
C8
1
WSL2512R5000FEA
0.5R
R1
Show 3 more
QtyPartRefs
1
0805W8F5602T5E
56k
R2
9
0805W8F1002T5E
10k
R3, R5, R6, R7, R8, R9, R10, R11 +1
2
0805W8F1001T5E
1k
R4, R13

Bldc controller design files

The KiCad project lives in the 2AMLogic/kicad-tools repository on GitHub; these links point at the commit this page was built from.

Bldc controller: common questions

What microcontroller does the Bldc controller use?

The Bldc controller is built around the ATMEGA328P-AU, from the AVR/Arduino family.

How big is the Bldc controller PCB?

The Bldc controller measures 70 × 90 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Bldc controller?

42 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Bldc controller design files?

From the 2AMLogic/kicad-tools repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Bldc controller design in my own project?

Yes, under the terms of its MIT license, which 2AMLogic chose for the repository.

Can I test firmware for the Bldc controller without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in kicad-tools

Similar boards