Usb joystick
2AMLogic·kicad-tools·boards/03-usb-joystick/output/usb_joystick.kicad_pcb
About the Usb joystick PCB
Usb joystick is an open source AVR/Arduino PCB design by 2AMLogic, published on GitHub under the MIT license. It is a 4-layer board measuring 80 × 60 mm, with 38 components from 17 distinct parts.
Its main chip is the ATMEGA32U4-AU, from the AVR/Arduino family. Other key parts include the USBLC6-2SC6. By type, the board carries 13 capacitors, 13 resistors, 5 switches, 3 connectors, 2 ICs and 1 crystal.
From the project
Standalone Python tools for parsing and manipulating KiCad schematic and PCB files
Real ATmega32U4-AU USB HID controller hardware: USB-C bus power and ESD, 8MHz crystal, reset/HWB support, AVR ISP, two filtered joystick axes and four buttons plus a joystick switch. The MCU uses the actual TQFP-44 pinout.
Revision A was a routing fixture with a fictitious 32-pin MCU mapping. Its saved routing and manufacturing outputs are not valid evidence for revision B. See DESIGN_REVIEW.md for primary sources, exact interface pinouts, bring-up requirements, and remaining release checks.
Main components on the Usb joystick
Usb joystick bill of materials (BOM)
38 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATMEGA32U4-AU Microchip | TQFP-44_10x10mm_P0.8mm | U1 |
| 1 | USBLC6-2SC6 STMicroelectronics | SOT-23-6 | U2 |
| 1 | ECS-80-12-33-JGN-TR 8MHz ECS | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB4085-GF-A GCT | USB_C_Receptacle_GCT_USB4085 | J1 |
| 1 | S5B-PH-SM4-TB(LF)(SN) Joystick 5V X Y SW JST | JST_PH_S5B-PH-SM4-TB_1x05-1MP_P2.00mm_Horizontal | J2 |
| 1 | TSM-103-01-T-DV-P-TR AVR ISP Samtec | Samtec_TSM-103-01-T-DV | J3 |
| 1 | 1206L035/16YR 350mA Littelfuse | Fuse_1206_3216Metric | F1 |
| 5 | TL3342F160QG E-Switch | SW_SPST_TL3342 | SW1, SW2, SW3, SW4, SW5 |
| 7 | GRM188R71C104KA01D 100nF Murata | C_0603_1608Metric | C1, C2, C3, C4, C5, C7, C13 |
| 1 | GRM188R71A105KA61D 1uF Murata | C_0603_1608Metric | C6 |
| 2 | GRM1885C1H150JA01D 15pF Murata | C_0603_1608Metric | C8, C9 |
| 2 | GRM188R71H103KA01D 10nF Murata | C_0603_1608Metric | C10, C11 |
| 1 | GRM188R61A475KE15D 4.7uF Murata | C_0603_1608Metric | C12 |
| 2 | RC0603FR-075K1L 5.1k Yageo | R_0603_1608Metric | R1, R2 |
| 2 | RC0402FR-0722RL 22 Yageo | R_0402_1005Metric | R3, R4 |
| 7 | RC0603FR-0710KL 10k Yageo | R_0603_1608Metric | R5, R6, R12, R13, R14, R15, R16 |
| 2 | RC0603FR-071KL 1k Yageo | R_0603_1608Metric | R10, R11 |
Usb joystick design files
The KiCad project lives in the 2AMLogic/kicad-tools repository on GitHub; these links point at the commit this page was built from.
Usb joystick: common questions
What microcontroller does the Usb joystick use?
The Usb joystick is built around the ATMEGA32U4-AU, from the AVR/Arduino family.
How big is the Usb joystick PCB?
The Usb joystick measures 80 × 60 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Usb joystick?
38 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Usb joystick design files?
From the 2AMLogic/kicad-tools repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Usb joystick design in my own project?
Yes, under the terms of its MIT license, which 2AMLogic chose for the repository.
Can I test firmware for the Usb joystick without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in kicad-tools
USB-C PD 5V supply — development
2AMLogic
100 × 65 mm47 parts4LMIT77STM32
Matchgroup test routed
2AMLogic
100 × 80 mm43 parts6LMIT77STM32
Matchgroup test
2AMLogic
100 × 80 mm43 parts6LMIT77AVR/Arduino
Bldc controller
2AMLogic
70 × 90 mm42 parts4LMIT77AVR/Arduino
Bldc controller routed
2AMLogic
70 × 90 mm42 parts4LMIT77AVR/Arduino
Usb joystick routed
2AMLogic
80 × 60 mm38 parts4LMIT77Four channel LVDS link demonstrator
2AMLogic
90 × 70 mm36 parts4LMIT77STM32
STM32F103C8 Development Board
2AMLogic
60 × 40 mm17 parts2LMIT77STM32
Mains fixture
2AMLogic
70 × 52 mm9 parts2LMIT77STM32
Negotiated stage
2AMLogic
70 × 52 mm9 parts2LMIT77
Similar boards
AVR/Arduino
Magspoof
samyk
35 × 29 mm11 parts2LNo license4.2kAVR/Arduino
Redox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0kAVR/Arduino
Labrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2kAVR/Arduino
ModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1kAVR/Arduino
V4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1kAVR/Arduino
Discipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k