USB-C PD 5V supply — development
2AMLogic·kicad-tools·boards/09-usbc-pd-power/output/usbc_pd_power.kicad_pcb
About the USB-C PD 5V supply — development PCB
USB-C PD 5V supply — development is an open source PCB design by 2AMLogic, published on GitHub under the MIT license. It is a 4-layer board measuring 100 × 65 mm, with 47 components from 32 distinct parts.
Other key parts include the STUSB4500QTR, TPS54302DDCR, INA226AIDGSR and TLV76033DBZR. By type, the board carries 18 resistors, 15 capacitors, 4 ICs, 3 connectors, 2 transistors and 2 diodes.
It belongs with the power & battery designs in this gallery.
From the project
Standalone Python tools for parsing and manipulating KiCad schematic and PCB files
Active development: a standalone USB-C PD sink powers a fixed 5 V buck regulator, targeting 3 A output, with I2C current/voltage telemetry. This is a real assembled-demo design, not a synthetic routing fixture. No manufacturing or measured-performance release has been made.
USB-C input → negotiated and switched VBUS → synchronous buck → shunt → 5 V output. A separate low-current 3.3 V supply powers the telemetry interface. An external 3.3 V I2C host reads telemetry and inspects the PD configuration; ordinary standalone power conversion does not require application firmware.
Main components on the USB-C PD 5V supply — development
USB-C PD 5V supply — development bill of materials (BOM)
47 components, 32 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STUSB4500QTR | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U1 |
| 1 | TPS54302DDCR | TSOT-23-6 | U2 |
| 1 | INA226AIDGSR | MSOP-10_3x3mm_P0.5mm | U3 |
| 1 | TLV76033DBZR | SOT-23 | U4 |
| 2 | AO4407A | SOIC-8_3.9x4.9mm_P1.27mm | Q1, Q2 |
| 1 | TYPE-C-31-M-12 USB-C PD INPUT | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | MKDS 1,5/2-5,08 5V OUTPUT | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | TSW-106-07-G-S I2C HOST 3V3 | PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | 0467002.NR 2A 32V | Fuse_1206_3216Metric | F1 |
| 1 | WSK2512R0100FEA 10m 1% 1W | R_Shunt_Vishay_WSK2512_6332Metric_T1.19mm | RSH1 |
| 1 | BZT52C12 12V | D_SOD-123 | D1 |
| 1 | LTST-C190KGKT OUTPUT | LED_0603_1608Metric | D2 |
| 1 | SRP7050TA-100M 10uH | SRP7050TA | L1 |
| 2 | 100NF 1u 50V | C_0603_1608Metric | C1, C13 |
| 4 | 100NF 1u 16V | C_0603_1608Metric | C2, C3, C14, C15 |
| 1 | 100NF 4.7n 50V | C_0603_1608Metric | C4 |
| 1 | CL31B106KBHNNNE 10u 50V | C_1206_3216Metric | C5 |
| 4 | CC0603KRX7R9BB104 100n 50V | C_0603_1608Metric | C6, C7, C11, C12 |
| 2 | CL31A226KAHNNNE 22u 25V | C_1206_3216Metric | C8, C9 |
| 1 | 100NF 75p C0G | C_0603_1608Metric | C10 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C21189 100k | R_0603_1608Metric | R1 |
| 1 | 10K 10k | R_0603_1608Metric | R2 |
| 2 | CRCW12061K00FKEAHP 1k | R_1206_3216Metric | R3, R4 |
| 1 | 680k | R_0603_1608Metric | R5 |
| 1 | 100k | R_0603_1608Metric | R6 |
| 1 | RT0603BRD07100KL 100k 0.1% | R_0603_1608Metric | R7 |
| 1 | RT0603BRD0713K3L 13.3k 0.1% | R_0603_1608Metric | R8 |
| 1 | 49.9 | R_0603_1608Metric | R9 |
| 2 | 10 | R_0603_1608Metric | R10, R11 |
| 2 | 4.7k | R_0603_1608Metric | R12, R13 |
| 4 | 10k | R_0603_1608Metric | R14, R15, R17, R18 |
| 1 | 2.2k | R_0603_1608Metric | R16 |
USB-C PD 5V supply — development design files
The KiCad project lives in the 2AMLogic/kicad-tools repository on GitHub; these links point at the commit this page was built from.
USB-C PD 5V supply — development: common questions
How big is the USB-C PD 5V supply — development PCB?
The USB-C PD 5V supply — development measures 100 × 65 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the USB-C PD 5V supply — development?
47 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the USB-C PD 5V supply — development design files?
From the 2AMLogic/kicad-tools repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the USB-C PD 5V supply — development design in my own project?
Yes, under the terms of its MIT license, which 2AMLogic chose for the repository.
More boards in kicad-tools
STM32
Matchgroup test
2AMLogic
100 × 80 mm43 parts6LMIT77STM32
Matchgroup test routed
2AMLogic
100 × 80 mm43 parts6LMIT77AVR/Arduino
Bldc controller
2AMLogic
70 × 90 mm42 parts4LMIT77AVR/Arduino
Bldc controller routed
2AMLogic
70 × 90 mm42 parts4LMIT77AVR/Arduino
Usb joystick routed
2AMLogic
80 × 60 mm38 parts4LMIT77AVR/Arduino
Usb joystick
2AMLogic
80 × 60 mm38 parts4LMIT77Four channel LVDS link demonstrator
2AMLogic
90 × 70 mm36 parts4LMIT77STM32
STM32F103C8 Development Board
2AMLogic
60 × 40 mm17 parts2LMIT77STM32
Negotiated stage
2AMLogic
70 × 52 mm9 parts2LMIT77STM32
Mains fixture
2AMLogic
70 × 52 mm9 parts2LMIT77
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k