HardLabs

RTE-for-RPI-Schematics

3mdeb·RTE-for-RPI-Schematics·kicad-files/rte_rpi.kicad_pcb

RTE-for-RPI-Schematics PCB layout, top view — open source Raspberry Pi board by 3mdeb

About the RTE-for-RPI-Schematics PCB

RTE-for-RPI-Schematics is an open source Raspberry Pi PCB design by 3mdeb, published on GitHub under the CERN-OHL-1.2 license. It is a 2-layer board measuring 104 × 57.9 mm, with 31 components from 21 distinct parts.

Its main chip is the Raspberry Pi 3 Header, from the Raspberry Pi family. Other key parts include the MCP23017, MAX3232 and 74LS06. By type, the board carries 11 connectors, 7 capacitors, 4 ICs, 4 resistors, 3 diodes and 1 transistor.

From the project

Schematics for the RTE for RPI board

This repository contains source files for Remote Testing Environment schematics.

If you want to read more about this project, here are some useful links:

Firmware/software: - meta-rte - custom firmware for RTE RPi [TBD] - RteCtrl - binary for power management on board (MIT license) Datasheet (under CC BY-SA 4.0 International License): - RTE RPi v0.1.2 datasheet

Main components on the RTE-for-RPI-Schematics

MCP23017MAX323274LS06

RTE-for-RPI-Schematics bill of materials (BOM)

31 components, 21 distinct parts.

QtyPartRefs
1
MCP23017
U1
1
MAX3232
U2
2
74LS06
U3, U4
1
NDS351AN
Q1
1
Raspberry Pi 3 Header
J1
1
I2C Header
J2
1
SPI Header
J3
1
RS232 OUT
J4
1
UART Enable
J5
1
DUT Power Supply Input
J6
1
DUT Power Supply Output
J7
1
EXT UART
J8
1
UART_HEADER
J9
2
OC_BUFFER_OUTPUT_HEADER
J10, J11
1
HF3FA
K1
1
S1A-E3/61T
D1
1
Orange LED 3V3
D2
1
Red LED 5V
D3
7
100nF
C1, C2, C3, C4, C5, C6, C7
3
1k
R1, R2, R4
Show 1 more
QtyPartRefs
1
10k
R3

RTE-for-RPI-Schematics design files

The KiCad project lives in the 3mdeb/RTE-for-RPI-Schematics repository on GitHub; these links point at the commit this page was built from.

RTE-for-RPI-Schematics: common questions

What microcontroller does the RTE-for-RPI-Schematics use?

The RTE-for-RPI-Schematics is built around the Raspberry Pi 3 Header, from the Raspberry Pi family.

How big is the RTE-for-RPI-Schematics PCB?

The RTE-for-RPI-Schematics measures 104 × 57.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RTE-for-RPI-Schematics?

31 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the RTE-for-RPI-Schematics design files?

From the 3mdeb/RTE-for-RPI-Schematics repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the RTE-for-RPI-Schematics design in my own project?

Yes, under the terms of its CERN-OHL-1.2 license, which 3mdeb chose for the repository.

Can I test firmware for the RTE-for-RPI-Schematics without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

Similar boards