Gpsdo
9a4db·iib-project·gpsdo/pcb/gpsdo.kicad_pcb
About the Gpsdo PCB
Gpsdo is an open source STM32 PCB design by 9a4db, published on GitHub. It is a 2-layer board measuring 80 × 50 mm, with 64 components from 32 distinct parts.
Its main chip is the STM32F405RxTx, from the STM32 family. Other key parts include the ADP3335, NC7SZ04, CS2100-CP, MAX-M8Q and NCP380. By type, the board carries 27 capacitors, 9 resistors, 7 ICs, 7 connectors, 6 diodes and 5 test points.
It belongs with the rf & radio designs in this gallery.
From the project
Work for my fourth year project
Main components on the Gpsdo
Gpsdo bill of materials (BOM)
64 components, 32 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | ADP3335 | MSOP-8 | IC1, IC6 |
| 1 | STM32F405RxTx | LQFP-64 | IC2 |
| 1 | NC7SZ04 | SOT-23-5 | IC3 |
| 1 | CS2100-CP | MSOP-10 | IC4 |
| 1 | MAX-M8Q | MAX-M8Q | IC5 |
| 1 | NCP380 | DFN-6-EP-ONSEMI | IC7 |
| 1 | 26M | XTAL-20x16 | Y1 |
| 1 | 26M TCXO | XTAL-25x20 | Y2 |
| 1 | LED | SIL-254P-02 | J1 |
| 1 | SWD_TC | TC2030-NL | P1 |
| 4 | SMA | SMA-EDGE | P2, P3, P4, P5 |
| 1 | USB-B | USB-B-SKT | P6 |
| 5 | TESTPAD | TESTPAD | TP1, TP2, TP3, TP4, TP5 |
| 4 | ESD_DIODE | 0402-L | D1, D2, D3, D4 |
| 2 | LED | 0603-LED | D5, D6 |
| 1 | 27nH | 0402 | L1 |
| 5 | 1u | 0603-L | C1, C12, C17, C23, C25 |
| 2 | 100n | 0402 | C2, C27 |
| 2 | 10p | 0402 | C3, C5 |
| 9 | 100n | 0603-L | C4, C6, C9, C11, C13, C14, C15, C20 +1 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 2u2 | 0603-L | C7, C8 |
| 2 | 10n | 0603-L | C10, C24 |
| 1 | 4u7 | 0603 | C16 |
| 2 | 1n | 0603-L | C18, C19 |
| 2 | 1u | 0402 | C22, C26 |
| 1 | 100 | 0402 | R1 |
| 2 | 10K | 0603-L | R2, R4 |
| 1 | 1M | 0603-L | R3 |
| 1 | 110k | 0402 | R5 |
| 1 | 10 | 0402 | R6 |
| 2 | 120 | 0603-L | R7, R8 |
| 1 | 1K | 0603-L | R9 |
Gpsdo design files
The KiCad project lives in the 9a4db/iib-project repository on GitHub; these links point at the commit this page was built from.
Gpsdo: common questions
What microcontroller does the Gpsdo use?
The Gpsdo is built around the STM32F405RxTx, from the STM32 family.
How big is the Gpsdo PCB?
The Gpsdo measures 80 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Gpsdo?
64 components, from 32 distinct parts. The full bill of materials is listed on this page.
Where can I download the Gpsdo design files?
From the 9a4db/iib-project repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Gpsdo design in my own project?
The repository has no license, so all rights stay with 9a4db. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Gpsdo without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k