6 open source boards using the CS2100-CP

Real designs built with the CS2100-CP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

The CS2100-CP in open source designs

The gallery holds 6 open source boards using the CS2100-CP from 3 GitHub repositories; a typical one measures about 55 × 45 mm and carries around 146 components.

83% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is TOAD by cuspaceflight.

Parts used alongside the CS2100-CP

Microcontrollers on boards using the CS2100-CP

What boards using the CS2100-CP are built for

CS2100-CP: common questions

Where can I find a CS2100-CP reference design?

Each of the 6 boards on this page is a real design using the CS2100-CP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the CS2100-CP?

The ADP3335, MAX-M8Q, NC7SZ04, NCP380 and STM32F405RxTx appear in the most repositories here.

Which microcontrollers do boards using the CS2100-CP use?

Most are built on STM32 (5).

How big is a typical board using the CS2100-CP?

The median is 55 × 45 mm, and 83% are two-layer designs.

What is the most popular open source board using the CS2100-CP?

By GitHub stars, TOAD by cuspaceflight, with 93 stars.

Can I simulate one of these boards using the CS2100-CP before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part