15 open source boards using the MAX-M8Q
Real designs built with the MAX-M8Q, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
BluePhil
pms67
50 × 66 mm99 parts2LMIT53ESP32
Black-Flipper
Broccoliux
142.1 × 143 mm206 parts4LNo license7STM32
Jerboa
cuspaceflight
20.8 × 47.8 mm72 parts2LMIT2STM32
Gpsdo
9a4db
80 × 50 mm64 parts2LNo license2Microchip SAM
LedMatrixDual
gregdavill
80 × 20 mm27 parts2LNo license1ESP32
Pebble
Yatekii
129 × 129 mm163 parts4LNo license0STM32
STM32F103 Telemetry V01
andreabadan
96 × 96 mm109 parts4LGPL-3.00RP2040/RP2350
PULP
JAS-UCF
84 × 38.1 mm68 parts2LCERN-OHL-S-2.00ESP32
HorseSense
Philippe12
35 × 55.3 mm63 parts4LNo license0STM32
TOAD
cuspaceflight
70 × 75 mm152 parts2LNo license93STM32
Jerboa panel
cuspaceflight
44.8 × 47.8 mm72 parts2LMIT2STM32
BluePhil
juan-LARRAYA
50 × 66 mm99 parts2LNo license0STM32
M3PSU - MCU Board
cuspaceflight
40 × 40 mm151 parts2LNo license93STM32
M3PSU - DC/DC 5V Board
cuspaceflight
39.5 × 39.5 mm140 parts2LNo license93STM32
M3radio
cuspaceflight
39.5 × 39.5 mm66 parts2LNo license93
How designs wire the MAX-M8Q
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the MAX-M8Q connects to, and the resistors, capacitors and other passives placed on it.
- The V_BCKP_6 pin has a decoupling capacitor on 10 of 11 designs, most often 100 nF (then 10 µF).
- The RESERVED_15 pin is left unconnected on 11 of 11 designs.
- The VCC_8 pin has a decoupling capacitor on 9 of 11 designs, most often 100 nF (then 10 µF).
- The VCC_IO_7 pin has a decoupling capacitor on 7 of 11 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GND_1pin 1 | Connected to: GND 100% | — |
| V_BCKP_6pin 6 | Connected to: 3.3V 82% · a signal 18% |
|
| VCC_IO_7pin 7 | Connected to: 3.3V 82% · not connected 18% |
|
| VCC_8pin 8 | Connected to: 3.3V 100% |
|
| GND_10pin 10 | Connected to: GND 100% | — |
| RF_IN_11pin 11 | Connected to: A connector 64% |
|
| GND_12pin 12 | Connected to: GND 100% | — |
| LNA_EN_13pin 13 | Connected to: Not connected 73% · a signal 27% | — |
| VCC_RF_14pin 14 | Connected to: Signal 82% |
|
| RESERVED_15pin 15 | Connected to: Not connected 100% | — |
| SDA_16pin 16 | Connected to: Not connected 64% · a signal 36% | — |
| SCL_17pin 17 | Connected to: Not connected 64% · a signal 36% | — |
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include M3PSU - MCU Board by cuspaceflight, BluePhil by pms67, Black-Flipper by Broccoliux and Gpsdo by 9a4db.
The MAX-M8Q in open source designs
The gallery holds 15 open source boards using the MAX-M8Q from 11 GitHub repositories; a typical one measures about 50 × 50 mm and carries around 99 components.
73% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is TOAD by cuspaceflight.
Parts used alongside the MAX-M8Q
Microcontrollers on boards using the MAX-M8Q
What boards using the MAX-M8Q are built for
MAX-M8Q: common questions
Where can I find a MAX-M8Q reference design?
Each of the 15 boards on this page is a real design using the MAX-M8Q. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MAX-M8Q V_BCKP_6 pin?
The V_BCKP_6 pin has a decoupling capacitor on 10 of 11 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 11 open source designs using the MAX-M8Q.
How is the MAX-M8Q RESERVED_15 pin connected?
The RESERVED_15 pin is left unconnected on 11 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the MAX-M8Q.
What decoupling capacitors do designs use on the MAX-M8Q VCC_8 pin?
The VCC_8 pin has a decoupling capacitor on 9 of 11 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 11 open source designs using the MAX-M8Q.
What parts are used alongside the MAX-M8Q?
The MPU-6050, USBLC6-2SC6, W25Q128JVS, ADP3335 and BGS12AL7 appear in the most repositories here.
Which microcontrollers do boards using the MAX-M8Q use?
Most are built on STM32 (10), ESP32 (3), RP2040/RP2350 (1) and Microchip SAM (1).
How big is a typical board using the MAX-M8Q?
The median is 50 × 50 mm, and 73% are two-layer designs.
What is the most popular open source board using the MAX-M8Q?
By GitHub stars, TOAD by cuspaceflight, with 93 stars.
Can I simulate one of these boards using the MAX-M8Q before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.