12 open source boards using the STM32F405RxTx

Real designs built with the STM32F405RxTx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filters|Most starred

How designs wire the STM32F405RxTx

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the STM32F405RxTx connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 31 has a capacitor to GND on 5 of 5 designs, most often 2.2 µF.
  • Pin 47 has a capacitor to GND on 5 of 5 designs, most often 2.2 µF.
  • Pin 1 is tied to 3.3V on 5 of 5 designs.
  • Pin 2 is left unconnected on 5 of 5 designs.
Pin 1Connected to: 3.3V 100%
  • Decoupling capacitor on 60% · 100 nF (4), 1 µF (1), 4.7 µF (1)
Pin 2Connected to: Not connected 100%
Pin 3Connected to: Not connected 80% · a signal 20%
Pin 4Connected to: Not connected 80% · a signal 20%
Pin 5Connected to: Signal 80% · not connected 20%
  • Crystal on 60% · 26 MHz (3)
  • Capacitor to GND on 40% · 10 pF (2)
Pin 6Connected to: Not connected 60% · a signal 40%
  • Series resistor on 40% · 100 Ω (2)
Pin 7Connected to: A connector 80% · not connected 20%
  • Capacitor to GND on 40% · 100 nF (2)
Pin 8Connected to: Not connected 60% · a signal 40%
  • Series resistor on 40% · 120 Ω (1), 1 kΩ (1)
Pin 9Connected to: Not connected 80% · a signal 20%
Pin 10Connected to: Not connected 80% · a signal 20%
Pin 11Connected to: Not connected 80% · a signal 20%
Pin 12Connected to: GND 100%
Pin 13Connected to: 3.3V 100%
  • Decoupling capacitor on 60% · 100 nF (4), 1 µF (3), 4.7 µF (1)
Pin 15Connected to: Not connected 60% · a signal 40%
Pin 17Connected to: Not connected 60% · a signal 40%
Pin 18Connected to: GND 100%
Pin 19Connected to: 3.3V 100%
  • Decoupling capacitor on 60% · 100 nF (5), 4.7 µF (2)
Pin 20Connected to: Not connected 60% · a signal 40%
Pin 22Connected to: Not connected 60% · a signal 40%
  • Series resistor on 40% · 100 Ω (1), 47 kΩ (1)
Pin 23Connected to: Not connected 80% · a signal 20%
Pin 24Connected to: Not connected 100%
Pin 25Connected to: Not connected 100%
Pin 26Connected to: Not connected 100%
Pin 27Connected to: Not connected 100%
Pin 28Connected to: Not connected 100%
Pin 29Connected to: Not connected 80% · a signal 20%
Pin 30Connected to: Not connected 80% · a signal 20%
Pin 31Connected to: Signal 100%
  • Capacitor to GND on 100% · 2.2 µF (5)
Pin 32Connected to: 3.3V 100%
  • Decoupling capacitor on 60% · 100 nF (3)
Pin 33Connected to: Not connected 80% · a signal 20%
Pin 35Connected to: Not connected 60% · a signal 40%
Pin 38Connected to: Not connected 60% · a signal 40%
Pin 39Connected to: Not connected 80% · a signal 20%
Pin 40Connected to: Not connected 80% · a signal 20%
Pin 41Connected to: Not connected 60% · a signal 40%
Pin 42Connected to: Not connected 60% · a signal 40%
Pin 43Connected to: Not connected 60% · a signal 40%
Pin 44Connected to: Not connected 80% · a signal 20%
Pin 45Connected to: Not connected 80% · a signal 20%
Pin 47Connected to: Signal 100%
  • Capacitor to GND on 100% · 2.2 µF (5)

24 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include M3PSU - MCU Board by cuspaceflight, M4psu by cuspaceflight, Gpsdo by 9a4db and Dsp by cillian64.

The STM32F405RxTx in open source designs

The gallery holds 12 open source boards using the STM32F405RxTx from 5 GitHub repositories; a typical one measures about 50 × 50 mm and carries around 146 components.

100% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is R1 panel by cuspaceflight.

Microcontrollers on boards using the STM32F405RxTx

What boards using the STM32F405RxTx are built for

STM32F405RxTx: common questions

Where can I find a STM32F405RxTx reference design?

Each of the 12 boards on this page is a real design using the STM32F405RxTx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the STM32F405RxTx pin 31 connected?

Pin 31 has a capacitor to GND on 5 of 5 designs, most often 2.2 µF. Counted from the KiCad layouts of 5 open source designs using the STM32F405RxTx.

How is the STM32F405RxTx pin 47 connected?

Pin 47 has a capacitor to GND on 5 of 5 designs, most often 2.2 µF. Counted from the KiCad layouts of 5 open source designs using the STM32F405RxTx.

How is the STM32F405RxTx pin 1 connected?

Pin 1 is tied to 3.3V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the STM32F405RxTx.

What parts are used alongside the STM32F405RxTx?

The ADP3335, CS2100-CP, LTC4151, MAX-M8Q and MCP2562 appear in the most repositories here.

Which microcontrollers do boards using the STM32F405RxTx use?

Most are built on STM32 (11) and ESP8266 (1).

How big is a typical board using the STM32F405RxTx?

The median is 50 × 50 mm, and 100% are two-layer designs.

What is the most popular open source board using the STM32F405RxTx?

By GitHub stars, R1 panel by cuspaceflight, with 93 stars.

Can I simulate one of these boards using the STM32F405RxTx before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part