10 open source boards using the NCP380
Real designs built with the NCP380, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
R1 panel
cuspaceflight
50 × 50 mm176 parts2LNo license93STM32
Gpsdo
9a4db
80 × 50 mm64 parts2LNo license2APMHat-4-powered
stephendade
65 × 30.5 mm57 parts2LGPL-3.01Power board
FOSDEM
109.5 × 76 mm150 parts2LNo license114STM32
M3PSU - MCU Board
cuspaceflight
40 × 40 mm151 parts2LNo license93STM32
M3PSU - DC/DC 5V Board
cuspaceflight
39.5 × 39.5 mm140 parts2LNo license93Strain 1-3
cuspaceflight
40 × 33 mm95 parts2LNo license93Strain 4-6
cuspaceflight
40 × 33 mm95 parts2LNo license93STM32
M3radio
cuspaceflight
39.5 × 39.5 mm66 parts2LNo license93Pressure
cuspaceflight
40 × 33 mm27 parts2LNo license93
The NCP380 in open source designs
The gallery holds 10 open source boards using the NCP380 from 4 GitHub repositories; a typical one measures about 40 × 39.5 mm and carries around 95 components.
100% are two-layer designs, the rest use four layers or more, and 10% carry an open source license.
The most starred is Power board by FOSDEM.
Parts used alongside the NCP380
Microcontrollers on boards using the NCP380
What boards using the NCP380 are built for
NCP380: common questions
Where can I find a NCP380 reference design?
Each of the 10 boards on this page is a real design using the NCP380. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the NCP380?
The CS2100-CP, MAX-M8Q, NC7SZ04 and STM32F405RxTx appear in the most repositories here.
Which microcontrollers do boards using the NCP380 use?
Most are built on STM32 (5).
How big is a typical board using the NCP380?
The median is 40 × 39.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the NCP380?
By GitHub stars, Power board by FOSDEM, with 114 stars.
Can I simulate one of these boards using the NCP380 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.