15 open source boards using the ADP3335
Real designs built with the ADP3335, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
M2fc
cuspaceflight
100 × 70 mm348 parts4LNo license5STM32
Avionics14
cuspaceflight
89.5 × 48 mm110 parts2LNo license4Bikedar
adamgreig
50 × 50 mm52 parts4LNo license3Basebandboard
adamgreig
50 × 50 mm80 parts2LNo license2STM32
Gpsdo
9a4db
80 × 50 mm64 parts2LNo license2STM32
Ignition
cuspaceflight
100 × 100 mm146 parts4LNo license1ESP8266
Control
adamgreig
100 × 40 mm70 parts2LNo license0STM32
Woodchuck
cuspaceflight
58 × 35 mm38 parts2LMIT0STM32
TOAD
cuspaceflight
70 × 75 mm152 parts2LNo license93STM32
Martlet 2 Radio Board
cuspaceflight
50 × 75 mm116 parts2LNo license5STM32
Control r1
cuspaceflight
90.5 × 51 mm65 parts2LNo license3STM32
Comms
cuspaceflight
80 × 50 mm50 parts4LNo license1M2rl
cuspaceflight
40 × 34 mm25 parts2LNo license5STM32
Okgo2mini
cuspaceflight
67.4 × 39.8 mm43 parts2LNo license3STM32
Okgo2usbcontrol
cuspaceflight
40 × 25 mm22 parts2LNo license3
How designs wire the ADP3335
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the ADP3335 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 has a decoupling capacitor on 10 of 10 designs, most often 100 nF (then 1 µF).
- Pin 2 has a decoupling capacitor on 10 of 10 designs, most often 100 nF (then 1 µF).
- Pin 3 has a decoupling capacitor on 10 of 10 designs, most often 100 nF (then 1 µF).
- Pin 6 has a decoupling capacitor on 9 of 10 designs, most often 1 µF (then 2.2 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: 3.3V 90% |
|
| Pin 2 | Connected to: 3.3V 90% |
|
| Pin 3 | Connected to: 3.3V 90% |
|
| Pin 4 | Connected to: GND 100% | — |
| Pin 5 | Connected to: Signal 90% |
|
| Pin 6 | Connected to: BATT 90% |
|
| Pin 7 | Connected to: BATT 100% |
|
| Pin 8 | Connected to: BATT 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include TOAD by cuspaceflight, M2fc by cuspaceflight, Avionics14 by cuspaceflight and Bikedar by adamgreig.
The ADP3335 in open source designs
The gallery holds 15 open source boards using the ADP3335 from 10 GitHub repositories; a typical one measures about 70 × 50 mm and carries around 65 components.
73% are two-layer designs, the rest use four layers or more, and 7% carry an open source license.
The most starred is TOAD by cuspaceflight.
Parts used alongside the ADP3335
What boards using the ADP3335 are built for
ADP3335: common questions
Where can I find a ADP3335 reference design?
Each of the 15 boards on this page is a real design using the ADP3335. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ADP3335 pin 1?
Pin 1 has a decoupling capacitor on 10 of 10 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 10 open source designs using the ADP3335.
What decoupling capacitors do designs use on the ADP3335 pin 2?
Pin 2 has a decoupling capacitor on 10 of 10 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 10 open source designs using the ADP3335.
What decoupling capacitors do designs use on the ADP3335 pin 3?
Pin 3 has a decoupling capacitor on 10 of 10 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 10 open source designs using the ADP3335.
What parts are used alongside the ADP3335?
The MICROSD, MS5611-01BA03, AD8226, AD8495 and AD8541 appear in the most repositories here.
Which microcontrollers do boards using the ADP3335 use?
Most are built on STM32 (11) and ESP8266 (1).
How big is a typical board using the ADP3335?
The median is 70 × 50 mm, and 73% are two-layer designs.
What is the most popular open source board using the ADP3335?
By GitHub stars, TOAD by cuspaceflight, with 93 stars.
Can I simulate one of these boards using the ADP3335 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.