Squarie

a5a7·squarie·KiCad/KiCad.kicad_pcb

Squarie PCB layout, top view — open source ESP32 board by a5a7

About the Squarie PCB

Squarie is an open source ESP32 PCB design by a5a7, published on GitHub. It is a 2-layer board measuring 70 × 70 mm, with 7 components from 6 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.

It belongs with the sensors designs in this gallery.

From the project

For halflife. It's a slight variant of starbie: https://github.com/SharKingStudios/Starbie.

A tiny motion-controlled digital pet (think Tamagotchi) that lives on a 0.96" OLED. Built for Halflife week 1, based on Starbie. It responds to a motion sensor, and buttons help it pick different actions.

I wanted to learn how to design my own PCB. Starbie's pet is a star, but I went with a square. Why? Because it has a cleaner symmetry.

Menu actions: NAP (sleeps with floating Zs), PLAY (runs laps across the screen), FEED (originally a jump, modified to additionally say "nom!"), PET (jumps with hearts).

Squarie, from the project README
From the project README

Main components on the Squarie

Squarie bill of materials (BOM)

7 components, 6 distinct parts.

QtyPartRefs
1
DHT11
U1
1
XIAO-ESP32-C3-SMD
U2
1
Conn_01x04_Pin
J1
1
Conn_01x08_Pin
J2
2
SW_Push
SW1, SW2
1
10k
R1

Squarie design files

The KiCad project lives in the a5a7/squarie repository on GitHub; these links point at the commit this page was built from.

Squarie: common questions

What microcontroller does the Squarie use?

The Squarie is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the Squarie PCB?

The Squarie measures 70 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Squarie?

7 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Squarie design files?

From the a5a7/squarie repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Squarie design in my own project?

The repository has no license, so all rights stay with a5a7. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Squarie without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards