Custom-ESP32-S3-WROOM-1U-Devboard

aaakum4·Custom-ESP32-S3-WROOM-1U-Devboard·PCB/Devboard Routed Backup.kicad_pcb

Custom-ESP32-S3-WROOM-1U-Devboard PCB layout, top view — open source ESP32 board by aaakum4

About the Custom-ESP32-S3-WROOM-1U-Devboard PCB

Custom-ESP32-S3-WROOM-1U-Devboard is an open source ESP32 PCB design by aaakum4, published on GitHub under the MIT license. It is a 2-layer board measuring 36 × 52.7 mm, with 35 components from 17 distinct parts.

Its main chip is the ESP32-S3-WROOM-1U-N8, from the ESP32 family. Other key parts include the HT7533-1. By type, the board carries 15 resistors, 8 capacitors, 7 connectors, 2 ICs, 2 switches and 1 inductor.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

As my second project where I make a custom PCB, this Devboard is as much of an educational and learning experience as it is a project to achieve a working Devboard that I can use for testing,

- Touch Screen (https://core-electronics.com.au/2-8-tft-display-240x320-with-capacitive-touchscreen.html) A possible later addition

- USB-C Power (https://jlcpcb.com/partdetail/KoreanHropartsElec-TYPEC31M12/C165948)

- Switch (https://jlcpcb.com/partdetail/XUNPU-TS_1088AR02016/C720477)

- https://www.arrow.com/en/products/1040310811/molex?utm_source=chatgpt.com

- https://core-electronics.com.au/male-pin-header-2-54mm-1x40.html

Custom-ESP32-S3-WROOM-1U-Devboard, from the project README
From the project README

Main components on the Custom-ESP32-S3-WROOM-1U-Devboard

Custom-ESP32-S3-WROOM-1U-Devboard bill of materials (BOM)

35 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1U-N8
ESP32-S3-WROOM-1U
Espressif Systems
U1
1
HT7533-1
MCP1700x-120xxMB
Holtek Semicon
U2
1
TYPE-C-31-M-12
USB_C_Receptacle_USB2.0_14P
Korean Hroparts Elec
J1
3
CONN_01X04
Conn_01x04
BOOMELE(Boom Precision Elec)
J2, J3, J7
1
473521001
Micro_SD_Card
MOLEX
J4
2
CONN_01X14
Conn_01x14
BOOMELE(Boom Precision Elec)
J5, J6
2
TS-1088-AR02016
SW_Push
XUNPU
SW1, SW2
1
BLM21PG221SN1D
FerriteBead
Murata Electronics
FB1
3
CL10A106KP8NNNC
10uF
Samsung Electro-Mechanics
C1, C2, C8
4
CL05B104KO5NNNC
0.1uF
Samsung Electro-Mechanics
C3, C5, C6, C7
1
CL10A226MP8NUNE
22uF
Samsung Electro-Mechanics
C4
2
0402WGF5101TCE
5.1k
UNI-ROYAL(Uniroyal Elec)
R1, R2
2
0402WGF270JTCE
27
UNI-ROYAL(Uniroyal Elec)
R3, R4
7
0402WGF1002TCE
10k
UNI-ROYAL(Uniroyal Elec)
R5, R7, R9, R10, R11, R12, R13
1
PA0402-R-070RL
0
YAGEO
R6
1
0603WAF1004T5E
1M
UNI-ROYAL(Uniroyal Elec)
R8
2
0402WGF470JTCE
4.7k
UNI-ROYAL(Uniroyal Elec)
R14, R15

Custom-ESP32-S3-WROOM-1U-Devboard design files

The KiCad project lives in the aaakum4/Custom-ESP32-S3-WROOM-1U-Devboard repository on GitHub; these links point at the commit this page was built from.

Custom-ESP32-S3-WROOM-1U-Devboard: common questions

What microcontroller does the Custom-ESP32-S3-WROOM-1U-Devboard use?

The Custom-ESP32-S3-WROOM-1U-Devboard is built around the ESP32-S3-WROOM-1U-N8, from the ESP32 family.

How big is the Custom-ESP32-S3-WROOM-1U-Devboard PCB?

The Custom-ESP32-S3-WROOM-1U-Devboard measures 36 × 52.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Custom-ESP32-S3-WROOM-1U-Devboard?

35 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Custom-ESP32-S3-WROOM-1U-Devboard design files?

From the aaakum4/Custom-ESP32-S3-WROOM-1U-Devboard repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Custom-ESP32-S3-WROOM-1U-Devboard design in my own project?

Yes, under the terms of its MIT license, which aaakum4 chose for the repository.

Can I test firmware for the Custom-ESP32-S3-WROOM-1U-Devboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards