HridayMitra
aadityaa0523·HridayMitra·source_code/hardware/pcb/hridaymitra_afe.kicad_pcb
About the HridayMitra PCB
HridayMitra is an open source ESP32 PCB design by aadityaa0523, published on GitHub under the MIT license. It is a 2-layer board measuring 70 × 50 mm, with 31 components from 20 distinct parts.
Its main chip is the to ESP32 DevKit, from the ESP32 family. Other key parts include the MCP6002, INA126, 74HC4053 (body / referen, 74HC4052 (current pair) and 74HC4052 (sense pair). By type, the board carries 14 resistors, 10 capacitors, 5 ICs and 2 connectors.
It belongs with the audio and wearables designs in this gallery.
From the project
Home early warning of worsening heart failure for elderly rural patients: check-in stool + amulet + SMS care loop (hackathon prototype, synthetic data; monitoring, not diagnosis)
No special chair to buy. No patch to wear.
- Use the chair you already have. A stool, a plain wooden chair, a plastic chair or an armchair: put it on our thin weighing platform. Nothing is fixed to the chair. (Not for wheeled or wobbly chairs.) - Just sit, feet on the plates. 4 stainless foot plates (heel and forefoot of each foot) and 4 load cells in the platform. - Hands on the sensor bar, held on the lap or fixed to the chair's armrests or handles: 4 hand strips, a fingertip pulse sensor, ✓ / ✗ / SOS buttons, a speaker and a status light. - 90 seconds a day. A voice guides the elder in…

Main components on the HridayMitra
HridayMitra bill of materials (BOM)
31 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP6002 | SOIC-8_3.9x4.9mm_P1.27mm | U1 |
| 1 | INA126 | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | 74HC4053 (body / referen | SOIC-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | 74HC4052 (current pair) | SOIC-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | 74HC4052 (sense pair) | SOIC-16_3.9x9.9mm_P1.27mm | U5 |
| 1 | Electrodes: 4 foot plate | JST_XH_B8B-XH-A_1x08_P2.50mm_Vertical | J1 |
| 1 | to ESP32 DevKit | PinHeader_1x08_P2.54mm_Vertical | J13 |
| 1 | 10u | C_0805_2012Metric | C1 |
| 3 | 1u | C_0805_2012Metric | C2, C3, C4 |
| 1 | 10n | C_0805_2012Metric | C5 |
| 5 | 100n | C_0805_2012Metric | C6, C7, C8, C9, C13 |
| 2 | 10k 1% | R_0805_2012Metric | R1, R2 |
| 1 | 100k | R_0805_2012Metric | R3 |
| 1 | 4.7k 1% | R_0805_2012Metric | R4 |
| 1 | 120 | R_0805_2012Metric | R5 |
| 4 | 1k | R_0805_2012Metric | R6, R7, R12, R13 |
| 2 | 10M | R_0805_2012Metric | R8, R9 |
| 1 | 16k (15k+1k) | R_0805_2012Metric | R10 |
| 1 | 1.5k | R_0805_2012Metric | R11 |
| 1 | 100 0.1% (Rcal) | R_0805_2012Metric | R22 |
HridayMitra design files
The KiCad project lives in the aadityaa0523/HridayMitra repository on GitHub; these links point at the commit this page was built from.
HridayMitra: common questions
What microcontroller does the HridayMitra use?
The HridayMitra is built around the to ESP32 DevKit, from the ESP32 family.
How big is the HridayMitra PCB?
The HridayMitra measures 70 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the HridayMitra?
31 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the HridayMitra design files?
From the aadityaa0523/HridayMitra repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the HridayMitra design in my own project?
Yes, under the terms of its MIT license, which aadityaa0523 chose for the repository.
Can I test firmware for the HridayMitra without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k