Keychain project
aagu8162·Keychain-project·pcb/keychain.kicad_pcb
About the Keychain project PCB
Keychain project is an open source ESP32 PCB design by aagu8162, published on GitHub under the MIT license. It is a 2-layer board measuring 50 × 29 mm, with 9 components from 8 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. By type, the board carries 2 connectors, 2 switches, 2 capacitors, 2 resistors and 1 IC.
It belongs with the displays & leds, iot & wireless and power & battery designs in this gallery.
From the project
A mini keychain like thing will an oled display
This repository holds the open-source hardware and firmware design files for my Hack Club Half-Life week 4 project submission. This project was done because I have wanted to build something like this.
This week my goal was to make a keychain with an oled display which would display words. I used Kicad to build the schematics and then finally built the pcb by referring to the oled guide and by also using my experience of building the week 1 project. There was not much customizations but I arranged it in a layout which I thought would make it more compact. I used the XIAO ESP32-C3 as my…
Main components on the Keychain project
Keychain project bill of materials (BOM)
9 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | XIAO-ESP32-C3-SMD | XIAO-ESP32-C3-SMD | U1 |
| 1 | Conn_01x04_Pin | PinSocket_1x04_P2.54mm_Vertical | J1 |
| 1 | Conn_01x02_Pin | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J2 |
| 1 | SW_Push | SW_SPST_PTS645Sx43SMTR92 | SW1 |
| 1 | SW_SPST | SW_SPDT_Shouhan_MSK12C02 | SW2 |
| 1 | 100 nF | C_0805_2012Metric | C1 |
| 1 | 10µF | C_0805_2012Metric | C2 |
| 2 | 4.7 kΩ | R_0805_2012Metric | R1, R2 |
Keychain project design files
The KiCad project lives in the aagu8162/Keychain-project repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/keychain.kicad_pcb
- Schematicpcb/keychain.kicad_sch
Keychain project: common questions
What microcontroller does the Keychain project use?
The Keychain project is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the Keychain project PCB?
The Keychain project measures 50 × 29 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Keychain project?
9 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Keychain project design files?
From the aagu8162/Keychain-project repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Keychain project design in my own project?
Yes, under the terms of its MIT license, which aagu8162 chose for the repository.
Can I test firmware for the Keychain project without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k