Clockx

AayanFardin·Clockx·PCB/Clockx.kicad_pcb

Clockx PCB layout, top view — open source ESP32 board by AayanFardin

About the Clockx PCB

Clockx is an open source ESP32 PCB design by AayanFardin, published on GitHub. It is a 2-layer board measuring 92 × 53.5 mm, with 8 components from 5 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. By type, the board carries 4 switches, 2 connectors, 1 IC and 1 buzzer.

It belongs with the power & battery, displays & leds and keyboards designs in this gallery.

From the project

ClockX is a custom-built digital clock powered by an ESP32-S3. It features a 2.25-inch TFT display, physical control buttons, a rechargeable battery, a custom-designed PCB, and a 3D-printed enclosure. Good for: Stopwatch, timer, and alarm.

- The top of the clock is open willingly to display the asthetic look of PCB.

Clockx, from the project README
From the project README

Main components on the Clockx

Clockx bill of materials (BOM)

8 components, 5 distinct parts.

QtyPartRefs
1
XIAO-ESP32-C3-SMD
U1
1
Conn_01x08_Pin
J1
1
18650battery
J2
1
Buzzer
BZ1
4
SW_Push
SW1, SW2, SW3, SW4

Clockx design files

The KiCad project lives in the AayanFardin/Clockx repository on GitHub; these links point at the commit this page was built from.

Clockx: common questions

What microcontroller does the Clockx use?

The Clockx is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the Clockx PCB?

The Clockx measures 92 × 53.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Clockx?

8 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Clockx design files?

From the AayanFardin/Clockx repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Clockx design in my own project?

The repository has no license, so all rights stay with AayanFardin. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Clockx without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards