3v3-500mA-LDO

abboju-nikhil·3v3-500mA-LDO

3v3-500mA-LDO PCB layout, top view — open source board by abboju-nikhil

About the 3v3-500mA-LDO PCB

3v3-500mA-LDO is an open source PCB design by abboju-nikhil, published on GitHub. It is a 2-layer board measuring 40 × 20 mm, with 17 components from 16 distinct parts.

Other key parts include the LP5912-3.3DRVR. By type, the board carries 4 capacitors, 3 test points, 3 diodes, 2 connectors, 2 resistors and 1 IC.

It belongs with the power & battery and sensors designs in this gallery.

From the project

3.8-4.2V to 3v3/500mA LDO

This project implements a 2-layer PCB that converts the output of a single-cell Li-ion battery (3.8V–4.2V) into a clean, regulated 3.3V supply capable of delivering up to 500mA continuous current.

Low output noise High reliability Battery efficiency Robust input protection Thermal performance Easy testing and debugging

🔋 Single-cell Li-ion input (3.8V–4.2V) ⚡ Fixed 3.3V regulated output 🔌 500mA continuous output current 🛡 Reverse polarity protection ⚠ Resettable overcurrent protection (PTC Fuse) ⚡ TVS surge & ESD protection 🔥 Thermal pad with via array 💡 Power indication LED 📈 Dedicated…

Main components on the 3v3-500mA-LDO

3v3-500mA-LDO bill of materials (BOM)

17 components, 16 distinct parts.

QtyPartRefs
1
LP5912-3.3DRVR
Texas Instruments
U1
1
DMP2035U-7
Diodes Incorporated
Q1
1
B2B-PH-K-S
JST-PH 2PIN
JST Sales America Inc.
J1
1
22-23-2021
2 PIN HEADER
Molex
J2
1
MF-NSMF110-2
Bourns
F1
1
V_IN
TP1
1
V_OUT
TP2
1
GND
TP3
1
SMAJ5.0CA
LITTELFUSE
D1
1
BZT52C6V8-7-F
6.8V
Diodes Incorporated
D2
1
LTST-C190KGKT
Lite-On
D3
1
CL21A226MOQNNNE
22uF/16V
Samsung Electro-Mechanics
C1
2
GCM188R71C104KA37J
100nF/16V
Murata Electronics
C2, C4
1
GRM21BZ71C106KE15L
10uF/16V
Murata Electronics
C3
1
RC0603FR-07100KL
100K
YAGEO
R1
1
RC0603FR-0710KL
10K
YAGEO
R2

3v3-500mA-LDO design files

The KiCad project lives in the abboju-nikhil/3v3-500mA-LDO repository on GitHub; these links point at the commit this page was built from.

3v3-500mA-LDO: common questions

How big is the 3v3-500mA-LDO PCB?

The 3v3-500mA-LDO measures 40 × 20 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 3v3-500mA-LDO?

17 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the 3v3-500mA-LDO design files?

From the abboju-nikhil/3v3-500mA-LDO repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the 3v3-500mA-LDO design in my own project?

The repository has no license, so all rights stay with abboju-nikhil. Use it as a reference, and ask the author before reusing the design.

Similar boards