7 open source boards using the LP5912-3.3DRVR
Real designs built with the LP5912-3.3DRVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
OpenFC-Lite-Mini
OpenDrone-hw
26.9 × 26.9 mm97 parts6LCERN-OHL-S-2.0104
OpenFC-Lite
37.9 × 37.9 mm107 parts6LCERN-OHL-S-2.032
RP2040/RP2350Cf mp3-player
will127534
62.8 × 61.7 mm111 parts4LMIT13
ESP32R2 HH Controllers
greghulette
56.6 × 111 mm122 parts4LNo license2
ESP32R2D2 LED Controller
123 × 78 mm94 parts4LNo license2
ESP32R2D2 LED Controller
123 × 78 mm94 parts4LNo license2
ESP32Sabe-FullSized
67.9 × 86.3 mm23 parts4LNo license2
The LP5912-3.3DRVR in open source designs
The gallery holds 7 open source boards using the LP5912-3.3DRVR from 4 GitHub repositories; a typical one measures about 62.8 × 78 mm and carries around 97 components.
100% use four copper layers or more, and 43% carry an open source license.
The most starred is OpenFC-Lite-Mini by OpenDrone-hw.
Parts used alongside the LP5912-3.3DRVR
Microcontrollers on boards using the LP5912-3.3DRVR
What boards using the LP5912-3.3DRVR are built for
LP5912-3.3DRVR: common questions
Where can I find a LP5912-3.3DRVR reference design?
Each of the 7 boards on this page is a real design using the LP5912-3.3DRVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the LP5912-3.3DRVR?
The BMI270, COS8051SOT, LP5912-1.8DRVR, RP2354B and SM06B-SRSS-TB(LF)(SN) appear in the most repositories here.
Which microcontrollers do boards using the LP5912-3.3DRVR use?
Most are built on ESP32 (4) and RP2040/RP2350 (1).
How big is a typical board using the LP5912-3.3DRVR?
The median is 62.8 × 78 mm, and 0% are two-layer designs.
What is the most popular open source board using the LP5912-3.3DRVR?
By GitHub stars, OpenFC-Lite-Mini by OpenDrone-hw, with 104 stars.
Can I simulate one of these boards using the LP5912-3.3DRVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.