Industrial can sensor node
About the Industrial can sensor node PCB
Industrial can sensor node is an open source PCB design by abdullah-EE, published on GitHub. It is a 2-layer board measuring 120 × 80 mm, with 34 components from 34 distinct parts.
Other key parts include the TC4427ACPA, INA180A1IDBVR and TCAN332DR. By type, the board carries 10 test points, 7 resistors, 5 capacitors, 4 connectors, 3 ICs and 2 diodes.
It belongs with the sensors designs in this gallery.
From the project
An embedded-systems and electronics project exploring how a small industrial-style motor controller can combine power switching, sensing, fault handling, and CAN communication in one system.
An embedded-systems and electronics project exploring how a small industrial-style motor controller can combine power switching, sensing, fault handling, and CAN communication in one system.
The project is being developed in stages: requirements and calculations first, then firmware and bench validation, followed by a custom PCB once the core design is proven.
Main components on the Industrial can sensor node
Industrial can sensor node bill of materials (BOM)
34 components, 34 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TC4427ACPA | DIP-8_W7.62mm | U1 |
| 1 | INA180A1IDBVR | SOT-23-5 | U2 |
| 1 | TCAN332DR | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | IRLZ44NPBF Infineon | TO-220-3_Vertical | Q1 |
| 1 | 12V_INPUT | OnShore_OSTVN02A150 | J1 |
| 1 | MOTOR_OUT | OnShore_OSTVN02A150 | J2 |
| 1 | NUCLEO_HEADER | PinHeader_1x09_P2.54mm_Vertical | J3 |
| 1 | CAN_BUS | OnShore_OSTVN03A150 | J4 |
| 1 | RXEF110 RXEF110_PTC Littelfuse | Littelfuse_RXEF110 | F1 |
| 1 | 10k_NTC | R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | TH1 |
| 1 | VMOTOR_12V | TestPoint_Keystone_5000-5004_Miniature | TP1 |
| 1 | MOTOR_SW | TestPoint_Keystone_5000-5004_Miniature | TP2 |
| 1 | PWM_GATE | TestPoint_Keystone_5000-5004_Miniature | TP3 |
| 1 | MOTOR_CURRENT_SHUNT_HI | TestPoint_Keystone_5000-5004_Miniature | TP4 |
| 1 | ISENSE_ADC | TestPoint_Keystone_5000-5004_Miniature | TP5 |
| 1 | VSENSE_ADC | TestPoint_Keystone_5000-5004_Miniature | TP6 |
| 1 | TEMP_ADC | TestPoint_Keystone_5000-5004_Miniature | TP7 |
| 1 | CANH | TestPoint_Keystone_5000-5004_Miniature | TP8 |
| 1 | CANL | TestPoint_Keystone_5000-5004_Miniature | TP9 |
| 1 | PGND | TestPoint_Keystone_5000-5004_Miniature | TP10 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1N5822 1N5822_FLYBACK Diodes Incorporated | D_DO-201AD_P15.24mm_Horizontal | D1 |
| 1 | SMBJ18A | D_SMB | D2 |
| 1 | 470uF_25V | CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | 08055C104KAT2A 100nF_DRIVER KYOCERA AVX | C_0805_2012Metric | C4 |
| 1 | 47nF_VSENSE | C_0805_2012Metric | C5 |
| 1 | 08055C104KAT2A 100nF_INA180 KYOCERA AVX | C_0805_2012Metric | C6 |
| 1 | 08055C104KAT2A 100nF_TCAN332 KYOCERA AVX | C_0805_2012Metric | C7 |
| 1 | 0.05R_SHUNT | R_2512_6332Metric | R1 |
| 1 | 22R_GATE | R_0805_2012Metric | R2 |
| 1 | 100k_GATE_PD | R_0805_2012Metric | R3 |
| 1 | 100k_VSENSE_TOP | R_0805_2012Metric | R4 |
| 1 | 27k_VSENSE_BOTTOM | R_0805_2012Metric | R5 |
| 1 | 10k_TEMP_TOP | R_0805_2012Metric | R6 |
| 1 | 120R_CAN_TERM | R_0805_2012Metric | R7 |
Industrial can sensor node design files
The KiCad project lives in the abdullah-EE/industrial-can-sensor-node repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/kicad.kicad_pcb
- Schematickicad/kicad.kicad_sch
- BOMhardware/bom.csv
Industrial can sensor node: common questions
How big is the Industrial can sensor node PCB?
The Industrial can sensor node measures 120 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Industrial can sensor node?
34 components, from 34 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Industrial can sensor node design files?
From the abdullah-EE/industrial-can-sensor-node repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Industrial can sensor node design in my own project?
The repository has no license, so all rights stay with abdullah-EE. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
FourThirdsEye
will127534
47 × 47 mm106 parts4LMIT377
VESC Controller
paltatech
160 × 90 mm908 parts2LNo license354
OneInchEye
39 × 39 mm79 parts4LMIT346