Final torpedo
AbdullahAbdelaziz122·Torpedo_Circuit_PCB·final-torpedo/Details/final-torpedo.kicad_pcb
About the Final torpedo PCB
Final torpedo is an open source ESP32 PCB design by AbdullahAbdelaziz122, published on GitHub. It is a 2-layer board measuring 82.5 × 62.5 mm, with 17 components from 13 distinct parts.
Its main chip is the ESP32 CP2102, from the ESP32 family. Other key parts include the MPU-6050. By type, the board carries 9 connectors, 3 resistors, 2 ICs, 1 transistor, 1 diode and 1 capacitor.
From the project
��# AI-Powered Smart System for Real-Time Underwater Threat Detection: Control Circuit This repository contains the hardware design files
��# AI-Powered Smart System for Real-Time Underwater Threat Detection: Control Circuit This repository contains the hardware design files for the Torpedo Control Circuit, a core component of the "AI-Powered Smart System for Real-Time Underwater Threat Detection and Marine Safety" graduation…
Main components on the Final torpedo
Final torpedo bill of materials (BOM)
17 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32 CP2102 | ESP32-S-38-pin-WiFi-CP2102-female-pins | U1 |
| 1 | MPU-6050 | InvenSense_QFN-24_4x4mm_P0.5mm | U2 |
| 1 | IRF4905 | TO-220-3_Vertical | Q1 |
| 1 | VCC | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | ESC_POWER | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | DC_STEPDOWN_20A DC_Stepdown_20A | TerminalBlock_Xinya_XY308-2.54-4P_1x04_P2.54mm_Horizontal | J3 |
| 4 | CONN_01X03_PIN Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J4, J5, J6, J7 |
| 1 | powerbank | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J8 |
| 1 | ESC_SIGNAL | PinHeader_1x03_P2.54mm_Vertical | J9 |
| 1 | 1N4744A 1N47xxA | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 1000UF 1000uF | CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 100K 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 2 | 4.7K 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3 |
Final torpedo design files
The KiCad project lives in the AbdullahAbdelaziz122/Torpedo_Circuit_PCB repository on GitHub; these links point at the commit this page was built from.
Final torpedo: common questions
What microcontroller does the Final torpedo use?
The Final torpedo is built around the ESP32 CP2102, from the ESP32 family.
How big is the Final torpedo PCB?
The Final torpedo measures 82.5 × 62.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Final torpedo?
17 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Final torpedo design files?
From the AbdullahAbdelaziz122/Torpedo_Circuit_PCB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Final torpedo design in my own project?
The repository has no license, so all rights stay with AbdullahAbdelaziz122. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Final torpedo without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Torpedo_Circuit_PCB
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k