Old final torpedo

AbdullahAbdelaziz122·Torpedo_Circuit_PCB·final-torpedo/data/old-final-torpedo.kicad_pcb

Old final torpedo PCB layout, top view — open source ESP32 board by AbdullahAbdelaziz122

About the Old final torpedo PCB

Old final torpedo is an open source ESP32 PCB design by AbdullahAbdelaziz122, published on GitHub. It is a 2-layer board measuring 82.5 × 62.5 mm, with 17 components from 13 distinct parts.

Its main chip is the ESP32 CP2102, from the ESP32 family. Other key parts include the MPU-6050. By type, the board carries 9 connectors, 3 resistors, 2 ICs, 1 transistor, 1 diode and 1 capacitor.

From the project

��# AI-Powered Smart System for Real-Time Underwater Threat Detection: Control Circuit This repository contains the hardware design files

��# AI-Powered Smart System for Real-Time Underwater Threat Detection: Control Circuit This repository contains the hardware design files for the Torpedo Control Circuit, a core component of the "AI-Powered Smart System for Real-Time Underwater Threat Detection and Marine Safety" graduation…

Main components on the Old final torpedo

ESP32 CP2102MPU-6050

Old final torpedo bill of materials (BOM)

17 components, 13 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32 CP2102
U1
1
MPU-6050
U2
1
IRF4905
Q1
1
VCC
J1
1
ESC_POWER
J2
1
DC_STEPDOWN_20A
DC_Stepdown_20A
J3
4
CONN_01X03_PIN
Conn_01x03_Pin
J4, J5, J6, J7
1
powerbank
J8
1
ESC_SIGNAL
J9
1
1N4744A
1N47xxA
D1
1
1000UF
1000uF
C1
1
100K
100k
R1
2
4.7K
4.7k
R2, R3

Old final torpedo design files

The KiCad project lives in the AbdullahAbdelaziz122/Torpedo_Circuit_PCB repository on GitHub; these links point at the commit this page was built from.

Old final torpedo: common questions

What microcontroller does the Old final torpedo use?

The Old final torpedo is built around the ESP32 CP2102, from the ESP32 family.

How big is the Old final torpedo PCB?

The Old final torpedo measures 82.5 × 62.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Old final torpedo?

17 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Old final torpedo design files?

From the AbdullahAbdelaziz122/Torpedo_Circuit_PCB repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Old final torpedo design in my own project?

The repository has no license, so all rights stay with AbdullahAbdelaziz122. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Old final torpedo without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Torpedo_Circuit_PCB

Similar boards