SkyEar
aberhe-eng·SkyEar·pcb/skyear.kicad_pcb
About the SkyEar PCB
SkyEar is an open source PCB design by aberhe-eng, published on GitHub. It is a 2-layer board measuring 90 × 64 mm, with 48 components from 33 distinct parts.
Other key parts include the TL072 and LM386N-1. By type, the board carries 20 capacitors, 15 resistors, 4 connectors, 4 diodes, 3 ICs and 1 switch.
It belongs with the audio and rf & radio designs in this gallery.
From the project
A pocket radio that listens to lightning thousands of miles away.
A pocket radio that listens to lightning thousands of miles away.
Lightning strikes somewhere on Earth dozens of times every second, and every strike gives off a burst of very-low-frequency (VLF) radio. SkyEar picks those bursts up with a wire antenna, cleans them up, and plays them through headphones. You hear distant storms as crackling ("sferics"), and sometimes as eerie falling whistles ("whistlers"): lightning signals that went out into space, followed Earth's magnetic field, and came back down.

Main components on the SkyEar
SkyEar bill of materials (BOM)
48 components, 33 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | TL072 | DIP-8_W7.62mm_Socket | U1, U2 |
| 1 | LM386N-1 | DIP-8_W7.62mm_Socket | U3 |
| 1 | Phoenix MKDS 1,5/2-5,08 (or same 5.08 mm footprint) BATTERY | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | Phoenix MKDS 1,5/2-5,08 (or same 5.08 mm footprint) ANTENNA | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J2 |
| 1 | CUI SJ1-3523N PHONES | Jack_3.5mm_CUI_SJ1-3523N_Horizontal | J3 |
| 1 | LINE_OUT | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Alps RK09K series, 10k audio (A) taper A10K | Potentiometer_Alps_RK09K_Single_Vertical | RV1 |
| 1 | C&K OS102011MA1QN1 (right-angle) POWER | SW_Slide_SPDT_Angled_CK_OS102011MA1Q | SW1 |
| 1 | 1N5817 | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | LED | LED_D5.0mm | D2 |
| 2 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D3, D4 |
| 2 | 100uF | CP_Radial_D6.3mm_P2.50mm | C1, C16 |
| 5 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C4, C15, C19, C20 |
| 1 | 47uF | CP_Radial_D6.3mm_P2.50mm | C3 |
| 1 | 22pF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C5 |
| 2 | 10nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C6, C7 |
| 1 | 150pF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C8 |
| 2 | 1uF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C9, C13 |
| 1 | 2.2nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C10 |
| 1 | 1nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C11 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 10uF | CP_Radial_D5.0mm_P2.00mm | C12, C14 |
| 1 | 47nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C17 |
| 1 | 220uF | CP_Radial_D8.0mm_P3.50mm | C18 |
| 1 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 5 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3, R4, R10, R11 |
| 1 | 10M | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 18k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R6 |
| 1 | 36k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7 |
| 2 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8, R13 |
| 1 | 3.3k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R12 |
| 1 | 10R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R14 |
| 1 | 47R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R15 |
SkyEar design files
The KiCad project lives in the aberhe-eng/SkyEar repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/skyear.kicad_pcb
- Schematicpcb/skyear.kicad_sch
SkyEar: common questions
How big is the SkyEar PCB?
The SkyEar measures 90 × 64 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SkyEar?
48 components, from 33 distinct parts. The full bill of materials is listed on this page.
Where can I download the SkyEar design files?
From the aberhe-eng/SkyEar repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SkyEar design in my own project?
The repository has no license, so all rights stay with aberhe-eng. Use it as a reference, and ask the author before reusing the design.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687