Miniaturized zigbee ble sensor node
abhishek947kumar·miniaturized-zigbee-ble-sensor-node·kicad_pcb_design/Miniaturized_Sensor_Node.kicad_pcb
About the Miniaturized zigbee ble sensor node PCB
Miniaturized zigbee ble sensor node is an open source Nordic nRF PCB design by abhishek947kumar, published on GitHub under the MIT license. It is a 2-layer board measuring 24 × 30 mm, with 27 components from 23 distinct parts.
Its main chip is the nRF52840-QIAA, from the Nordic nRF family. Other key parts include the SHT40, BMP390 and OPT3001. By type, the board carries 11 capacitors, 4 ICs, 3 inductors, 3 resistors, 2 crystals and 1 transistor.
It belongs with the iot & wireless and sensors designs in this gallery.
From the project
An ultra-compact, coin-cell-powered (CR2032) multiprotocol environmental sensor node implemented on a $24.0 \times 30.0\text{ mm}$ 2-layer FR-4 PCB.
An ultra-compact, coin-cell-powered (CR2032) multiprotocol environmental sensor node implemented on a $24.0 \times 30.0\text{ mm}$ 2-layer FR-4 PCB.
This repository contains the complete cross-domain engineering workflow: 1. Electromagnetic CAD & Detuning Study (CST Studio Suite 2026): 3D electrodynamic models and parametric sweeps analyzing Corner-Mount vs. End-Mount ceramic chip antennas, dielectric loading from enclosure plastics (PP, ABS, PC, Nylon), air gaps, and CR2032 battery proximity detuning. 2. KiCad EDA PCB Design (KiCad 5.1.6): Complete schematic (.sch), 2-layer PCB layout…
Main components on the Miniaturized zigbee ble sensor node
Miniaturized zigbee ble sensor node bill of materials (BOM)
27 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | nRF52840-QIAA | QFN-48-1EP_6x6mm_P0.4mm_EP4.6x4.6mm_ThermalVias | U1 |
| 1 | SHT40 | Sensirion_DFN-4-1EP_2x2mm_P1mm_EP0.7x1.6mm | U2 |
| 1 | BMP390 | Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumbering | U3 |
| 1 | OPT3001 | WSON-6_1.5x1.5mm_P0.5mm | U4 |
| 1 | DMG2305UX | SOT-23 | Q1 |
| 1 | 32MHz | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | 32.768kHz | Crystal_SMD_2012-2Pin_2.0x1.2mm | Y2 |
| 1 | SWD_PROG | PinHeader_1x04_P1.27mm_Vertical | J1 |
| 1 | 2450AT18D0100 | Johanson_2450AT18x100 | ANT1 |
| 1 | CR2032_Holder | BatteryHolder_Keystone_3002_1x2032 | BT1 |
| 1 | 4.7nH_Series | L_0402_1005Metric | L1 |
| 1 | 10uH | L_0603_1608Metric | L2 |
| 1 | 15nH | L_0402_1005Metric | L3 |
| 1 | 47uF_6.3V | C_0805_2012Metric | C1 |
| 3 | 100nF | C_0402_1005Metric | C2, C3, C4 |
| 1 | 1.0uF | C_0402_1005Metric | C5 |
| 1 | 2.2pF_Shunt | C_0402_1005Metric | C6 |
| 1 | DNP_Shunt | C_0402_1005Metric | C7 |
| 2 | 12pF | C_0402_1005Metric | C8, C9 |
| 2 | 15pF | C_0402_1005Metric | C10, C11 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10k_SCL | R_0402_1005Metric | R1 |
| 1 | 10k_SDA | R_0402_1005Metric | R2 |
| 1 | 100k_RST | R_0402_1005Metric | R3 |
Miniaturized zigbee ble sensor node design files
The KiCad project lives in the abhishek947kumar/miniaturized-zigbee-ble-sensor-node repository on GitHub; these links point at the commit this page was built from.
Miniaturized zigbee ble sensor node: common questions
What microcontroller does the Miniaturized zigbee ble sensor node use?
The Miniaturized zigbee ble sensor node is built around the nRF52840-QIAA, from the Nordic nRF family.
How big is the Miniaturized zigbee ble sensor node PCB?
The Miniaturized zigbee ble sensor node measures 24 × 30 mm, has 2 copper layers and is 1 mm thick.
How many components are on the Miniaturized zigbee ble sensor node?
27 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the Miniaturized zigbee ble sensor node design files?
From the abhishek947kumar/miniaturized-zigbee-ble-sensor-node repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Miniaturized zigbee ble sensor node design in my own project?
Yes, under the terms of its MIT license, which abhishek947kumar chose for the repository.
Can I test firmware for the Miniaturized zigbee ble sensor node without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.
Similar boards
Nordic nRF
Keyboard
byrantech
262.5 × 109.6 mm206 parts2LMIT4.3kNordic nRF
TOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0kNordic nRF
Pixl.js
solosky
40 × 23 mm45 parts4LGPL-2.01.4kNordic nRF
Management
dennisss
101 × 31.5 mm50 parts2LApache-2.0381Nordic nRF
Board
dennisss
363 × 128 mm420 parts4LApache-2.0381Nordic nRF
Board hl15-latest
dennisss
61 × 37 mm14 parts2LApache-2.0381