14 open source boards using the SHT40
Real designs built with the SHT40, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Air quality sensor
roepkefeller
50.8 × 45 mm75 parts4LNo license59ESP32
PCB CANNONBALL
user-will
25.6 × 23.6 mm58 parts4LNo license14ESP32
OpenTRV-ESP
mpiraux
45 × 53 mm58 parts4LCERN-OHL-P-2.02Silicon Labs
Dormouse
temonuv
36 × 25.1 mm9 parts2LMIT2ESP32
Thermocouple new
Daniele21211
99 × 67 mm215 parts4LNo license0ESP32
ThermoBox
Focursed
49 × 64 mm43 parts2LNo license0ESP32
Soily
danstiner
25 × 129.5 mm38 parts2LNo license0ESP32
Airnode s3
AskAlice
70 × 50 mm31 parts2LNo license0Nordic nRF
Miniaturized zigbee ble sensor node
abhishek947kumar
24 × 30 mm27 parts2LMIT0- schematic only · 30 parts
Lidar roomscanner
hellosamblack
30 partsNo license0 - schematic only · 4 parts
Loci vision
shauchit
4 partsCustom license0 ESP32
Roomnode s3
AskAlice
65 × 50 mm31 parts2LNo license0ESP32
Enlace esp32s3
ayemi-dev
90 × 60 mm65 parts2LNo license0ESP32
Roomnode c3-mini
AskAlice
40 × 35 mm24 parts2LNo license0
How designs wire the SHT40
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the SHT40 connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 1 µF).
- The SDA pin has a pull-up to 3.3V on 7 of 9 designs, most often 4.7 kΩ (then 10 kΩ).
- The SCL pin has a pull-up to 3.3V on 7 of 9 designs, most often 4.7 kΩ (then 10 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SDApin 1 | Connected to: The microcontroller 100%, a connector 33% |
|
| SCLpin 2 | Connected to: The microcontroller 100%, a connector 33% |
|
| VDDpin 3 | Connected to: 3.3V 89% |
|
| VSSpin 4 | Connected to: GND 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Air quality sensor by roepkefeller, PCB CANNONBALL by user-will, OpenTRV-ESP by mpiraux and Dormouse by temonuv.
The SHT40 in open source designs
The gallery holds 14 open source boards using the SHT40 from 12 GitHub repositories; a typical one measures about 47 × 50 mm and carries around 35 components.
67% are two-layer designs, the rest use four layers or more, and 21% carry an open source license.
The most starred is Air quality sensor by roepkefeller.
Parts used alongside the SHT40
Microcontrollers on boards using the SHT40
What boards using the SHT40 are built for
SHT40: common questions
Where can I find a SHT40 reference design?
Each of the 14 boards on this page is a real design using the SHT40. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SHT40 VDD pin?
The VDD pin has a decoupling capacitor on 9 of 9 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 9 open source designs using the SHT40.
What pull-up resistor is used on the SHT40 SDA pin?
The SDA pin has a pull-up to 3.3V on 7 of 9 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 9 open source designs using the SHT40.
What pull-up resistor is used on the SHT40 SCL pin?
The SCL pin has a pull-up to 3.3V on 7 of 9 designs, most often 4.7 kΩ (then 10 kΩ). Counted from the KiCad layouts of 9 open source designs using the SHT40.
What parts are used alongside the SHT40?
The ESP32-C3-WROOM-02, USBLC6-2SC6, AMS1117-3.3 and SCD41 appear in the most repositories here.
Which microcontrollers do boards using the SHT40 use?
Most are built on ESP32 (10), Nordic nRF (1) and Silicon Labs (1).
How big is a typical board using the SHT40?
The median is 47 × 50 mm, and 67% are two-layer designs.
What is the most popular open source board using the SHT40?
By GitHub stars, Air quality sensor by roepkefeller, with 59 stars.
Can I simulate one of these boards using the SHT40 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.