Temperature Sensor I2C

ABlairJamieson·Temperature_Sensor_I2C

Temperature Sensor I2C PCB layout, top view — open source board by ABlairJamieson

About the Temperature Sensor I2C PCB

Temperature Sensor I2C is an open source PCB design by ABlairJamieson, published on GitHub. It is a 2-layer board measuring 28 × 11 mm, with 8 components from 5 distinct parts.

Other key parts include the TMP117AIDRVR. By type, the board carries 4 resistors, 2 capacitors, 1 IC and 1 connector.

It belongs with the sensors designs in this gallery.

From the project

Small TMP117 temperature-sensor board for the custom Radxa CM5 camera carrier. The intended use is remote temperature monitoring, including the camera FPGA area. Two boards can connect using separate cables to the carrier's two parallel I2C connectors, provided each sensor has a

Small TMP117 temperature-sensor board for the custom Radxa CM5 camera carrier. The intended use is remote temperature monitoring, including the camera FPGA area. Two boards can connect using separate cables to the carrier's two parallel I2C connectors, provided each sensor has a different address.

Open Temperature Sensor I2C.kicadpro` in KiCad 10.

- Temperature Sensor I2C.kicadsch: schematic. - Temperature Sensor I2C.kicadpcb: routed PCB. - includes/TMP117AIDRVR/: custom symbol, footprint and STEP model. - sym-lib-table and fp-lib-table: project-relative library definitions.

Main components on the Temperature Sensor I2C

Temperature Sensor I2C bill of materials (BOM)

8 components, 5 distinct parts.

QtyPartRefs
1
TMP117AIDRVR
U1
1
Conn_01x04_Pin
J1
1
10uF
C1
1
0.1uF
C2
4
0
R1, R2, R3, R4

Temperature Sensor I2C design files

The KiCad project lives in the ABlairJamieson/Temperature_Sensor_I2C repository on GitHub; these links point at the commit this page was built from.

Temperature Sensor I2C: common questions

How big is the Temperature Sensor I2C PCB?

The Temperature Sensor I2C measures 28 × 11 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Temperature Sensor I2C?

8 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Temperature Sensor I2C design files?

From the ABlairJamieson/Temperature_Sensor_I2C repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Temperature Sensor I2C design in my own project?

The repository has no license, so all rights stay with ABlairJamieson. Use it as a reference, and ask the author before reusing the design.

Similar boards