IMU

abstractfoundry·lumicube-boards·PCBs/IMU/IMU.kicad_pcb

IMU PCB layout, top view — open source STM32 board by abstractfoundry

About the IMU PCB

IMU is an open source STM32 PCB design by abstractfoundry, published on GitHub. It is a 2-layer board measuring 17.4 × 25 mm, with 24 components from 16 distinct parts.

Its main chip is the STM32F042F6P6, from the STM32 family. Other key parts include the ME6211C33M5G-N, 74LVC2G07 and BNO055. By type, the board carries 8 capacitors, 7 resistors, 4 ICs, 2 connectors and 1 crystal.

It belongs with the sensors designs in this gallery.

From the project

PCB and firmware design files for some of the LumiCube components

Note: this is just for reference. There are probably various broken links to directories along with other issues.

The firmware requires STMCubeIDE. The PCB files require KiCAD.

Main components on the IMU

IMU bill of materials (BOM)

24 components, 16 distinct parts.

QtyPartRefs
1
ME6211C33M5G-N
U1
1
STM32F042F6P6
U2
1
74LVC2G07
U3
1
BNO055
U4
1
Crystal_32.768K
Y1
1
FemaleConn_1x6
J1
1
MaleConn_1x6
J2
1
CompanyIcon
IGNORE1
1
IMU v0.11
IGNORE2
4
4.7uF
C1, C2, C3, C4
1
0.1uF
C5
1
1uF
C6
2
22pF
C8, C9
4
10K
R1, R2, R4, R7
1
10R
R3
2
3.3K
R5, R6

IMU design files

The KiCad project lives in the abstractfoundry/lumicube-boards repository on GitHub; these links point at the commit this page was built from.

IMU: common questions

What microcontroller does the IMU use?

The IMU is built around the STM32F042F6P6, from the STM32 family.

How big is the IMU PCB?

The IMU measures 17.4 × 25 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the IMU?

24 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the IMU design files?

From the abstractfoundry/lumicube-boards repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the IMU design in my own project?

The repository has no license, so all rights stay with abstractfoundry. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the IMU without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in lumicube-boards

Similar boards