THP
abstractfoundry·lumicube-boards·PCBs/THP/THP.kicad_pcb
About the THP PCB
THP is an open source STM32 PCB design by abstractfoundry, published on GitHub. It is a 2-layer board measuring 17.4 × 25 mm, with 20 components from 12 distinct parts.
Its main chip is the STM32F042F6P6, from the STM32 family. Other key parts include the ME6211C33M5G-N, BME280 and 74LVC2G07. By type, the board carries 6 resistors, 5 capacitors, 4 ICs and 2 connectors.
From the project
PCB and firmware design files for some of the LumiCube components
Note: this is just for reference. There are probably various broken links to directories along with other issues.
The firmware requires STMCubeIDE. The PCB files require KiCAD.
Main components on the THP
THP bill of materials (BOM)
20 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ME6211C33M5G-N | SOT-23-5 | U1 |
| 1 | STM32F042F6P6 | STM32F042F6P6 | U2 |
| 1 | BME280 | TempHumidyPressure_BME280 | U3 |
| 1 | 74LVC2G07 | SOT-23-6 | U4 |
| 1 | FemaleConn_1x6 | M22-6540642R | J1 |
| 1 | MaleConn_1x6 | M22-5330605R | J2 |
| 1 | CompanyIcon | CompanyIcon | IGNORE1 |
| 1 | Temp, humidy, | BoardText | IGNORE2 |
| 1 | pressure v0.11 | BoardText | IGNORE3 |
| 5 | 4.7uF | C_0402_1005Metric | C1, C2, C3, C4, C5 |
| 5 | 10K | R_0402_1005Metric | R1, R2, R3, R4, R6 |
| 1 | 10R | R_0402_1005Metric | R5 |
THP design files
The KiCad project lives in the abstractfoundry/lumicube-boards repository on GitHub; these links point at the commit this page was built from.
- LayoutPCBs/THP/THP.kicad_pcb
THP: common questions
What microcontroller does the THP use?
The THP is built around the STM32F042F6P6, from the STM32 family.
How big is the THP PCB?
The THP measures 17.4 × 25 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the THP?
20 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the THP design files?
From the abstractfoundry/lumicube-boards repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the THP design in my own project?
The repository has no license, so all rights stay with abstractfoundry. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the THP without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in lumicube-boards
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k