Ble pcb

AchyuthaU24·ble-pcb-kicad

Ble pcb layout, top view — open source ESP32 board by AchyuthaU24

About the Ble pcb

Ble pcb is an open source ESP32 PCB design by AchyuthaU24, published on GitHub. It is a 2-layer board measuring 44.5 × 29.5 mm, with 13 components from 8 distinct parts.

Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the LM2596S-3.3 and DHT11. By type, the board carries 5 resistors, 3 ICs, 2 capacitors, 1 connector, 1 diode and 1 inductor.

It belongs with the iot & wireless designs in this gallery.

From the project

BLE module PCB designed in KiCad - schematic, layout and BOM

A custom BLE module PCB designed from scratch in KiCad 10.

Validated the design through ERC, DRC, and 3D mechanical checks, producing fabrication-ready Gerber files for low-power wireless sensing applications.

LM2985S-3.3 — Power regulation from 9V to 3.3V

SB120 Schottky Diode — Reverse-current protection and improved efficiency]

Ble pcb, from the project README
From the project README

Main components on the Ble pcb

Ble pcb bill of materials (BOM)

13 components, 8 distinct parts.

QtyPartRefs
1
ESP32-C3-WROOM-02
U1
1
LM2596S-3.3
U2
1
DHT11
U3
1
Conn_01x04_Pin
J1
1
SB120
D1
1
47uH
L1
2
330uF
C1, C2
5
10K
R1, R2, R3, R4, R5

Ble pcb design files

The KiCad project lives in the AchyuthaU24/ble-pcb-kicad repository on GitHub; these links point at the commit this page was built from.

Ble pcb: common questions

What microcontroller does the Ble pcb use?

The Ble pcb is built around the ESP32-C3-WROOM-02, from the ESP32 family.

How big is the Ble pcb?

The Ble pcb measures 44.5 × 29.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Ble pcb?

13 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the Ble pcb design files?

From the AchyuthaU24/ble-pcb-kicad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Ble pcb design in my own project?

The repository has no license, so all rights stay with AchyuthaU24. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Ble pcb without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards